(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 (UN+) - 2 (UN-)
|
Switch not pushed (Key removed)
|
10 kΩ or higher
|
1 (UN+) - 2 (UN-)
|
Switch pushed (Key inserted)
|
Below 1 Ω
|
If the result is not as specified, replace the unlock warning switch assembly.
|
|
*a
|
Component without harness connected
(Unlock Warning Switch Assembly)
|
*b
|
Switch not pushed
|
*c
|
Switch pushed
|
|
|