Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001GTRD
Model Year Start: 2020 Model: GR Corolla Prod Date Range: [01/2019 -           ]
Title: LIGHTING (EXT): LICENSE PLATE LIGHT ASSEMBLY (for Sedan): INSPECTION; 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 -        ]

INSPECTION

PROCEDURE

1. INSPECT LICENSE PLATE LIGHT ASSEMBLY LH

*a

Component without harness connected

(License Plate Light Assembly LH)

(a) Connect 4 dry-cell batteries (1.5 V) in series.

NOTICE:

Do not use rechargeable batteries as they may not output a voltage of 1.5 V.

(b) Apply 6.0 V battery voltage to the license plate light assembly LH and check that the light illuminates.

OK:

Measurement Condition

Specified Condition

Positive (+) lead from the batteries → Terminal O113-1 (B)

Negative (-) lead from the batteries → Terminal O113-2 (E)

License plate light illuminates

If the result is not as specified, replace the license plate light assembly.

2. INSPECT LICENSE PLATE LIGHT ASSEMBLY RH

*a

Component without harness connected

(License Plate Light Assembly RH)

(a) Connect 4 dry-cell batteries (1.5 V) in series.

NOTICE:

Do not use rechargeable batteries as they may not output a voltage of 1.5 V.

(b) Apply 6.0 V battery voltage to the license plate light assembly RH and check that the light illuminates.

OK:

Measurement Condition

Specified Condition

Positive (+) lead from the batteries → Terminal O112-1 (B)

Negative (-) lead from the batteries → Terminal O112-2 (E)

License plate light illuminates

If the result is not as specified, replace the license plate light assembly.