| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001GTRD |
| Model Year Start: 2020 | Model: GR Corolla | Prod Date Range: [01/2019 - ] |
| Title: LIGHTING (EXT): LICENSE PLATE LIGHT ASSEMBLY (for Sedan): INSPECTION; 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT LICENSE PLATE LIGHT ASSEMBLY LH
|
*a |
Component without harness connected (License Plate Light Assembly LH) |
(a) Connect 4 dry-cell batteries (1.5 V) in series.
NOTICE:
Do not use rechargeable batteries as they may not output a voltage of 1.5 V.
(b) Apply 6.0 V battery voltage to the license plate light assembly LH and check that the light illuminates.
OK:
|
Measurement Condition |
Specified Condition |
|---|---|
|
Positive (+) lead from the batteries → Terminal O113-1 (B) Negative (-) lead from the batteries → Terminal O113-2 (E) |
License plate light illuminates |
If the result is not as specified, replace the license plate light assembly.
2. INSPECT LICENSE PLATE LIGHT ASSEMBLY RH
|
*a |
Component without harness connected (License Plate Light Assembly RH) |
(a) Connect 4 dry-cell batteries (1.5 V) in series.
NOTICE:
Do not use rechargeable batteries as they may not output a voltage of 1.5 V.
(b) Apply 6.0 V battery voltage to the license plate light assembly RH and check that the light illuminates.
OK:
|
Measurement Condition |
Specified Condition |
|---|---|
|
Positive (+) lead from the batteries → Terminal O112-1 (B) Negative (-) lead from the batteries → Terminal O112-2 (E) |
License plate light illuminates |
If the result is not as specified, replace the license plate light assembly.
|
|