Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GTR6 |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [01/2019 -
] |
Title: LIGHTING (EXT): REAR LIGHT ASSEMBLY (for Sedan): DISASSEMBLY; 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - ] |
DISASSEMBLY
CAUTION / NOTICE / HINT
HINT:
-
Use the same procedure for the RH side and LH side.
-
The following procedure is for the LH side.
PROCEDURE
1. REMOVE REAR LIGHT SOCKET AND WIRE
(a) for Bulb Type Rear Side Marker Light:
(1) Turn the rear light socket and wire with the back-up light bulb as shown in the illustration to remove them as a unit.
|
Remove in this Direction
|
(b) for LED Type Rear Side Marker Light:
(1) Turn the rear light socket and wire with the back-up light bulb as shown in the illustration to disconnect them as a unit.
|
Disconnect in this Direction
|
(2) Disconnect the connector to remove the rear light socket and wire.
2. REMOVE BACK-UP LIGHT BULB
(a) Remove the back-up light bulb from the rear light socket and wire.
3. REMOVE REAR LIGHT GASKET
(a) Remove the rear light gasket.
NOTICE:
-
Be sure to remove all traces of the old rear light gasket from the vehicle body.
-
Do not reuse the removed rear light gasket. Be sure to install a new rear light gasket to prevent water ingress.
|
|
4. REMOVE LICENSE PLATE LIGHT SHADE
(a) Remove the license plate light shade.
NOTICE:
-
Be sure to remove all traces of the old license plate light shade from the vehicle body.
-
Do not reuse the removed license plate light shade. Be sure to install a new license plate light shade to prevent water ingress.
|
|
5. REMOVE REAR LIGHT LENS AND BODY
|