| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001GOX3 |
| Model Year Start: 2020 | Model: GR Corolla | Prod Date Range: [01/2019 - 03/2019] |
| Title: SEAT: REAR SEAT ASSEMBLY: DISASSEMBLY; 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 03/2019] | ||
DISASSEMBLY
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. REMOVE REAR SEATBACK UPPER LOCK BEZEL LH (for LH Side)
(a) for Hatchback:
|
(1) Disengage the 4 claws to remove the rear seatback upper lock bezel LH. |
|
2. REMOVE REAR SEATBACK STOP BUTTON GROMMET (for LH Side)
(a) for Sedan:
|
(1) Disengage the 3 claws to remove the rear seatback stop button grommet. |
|
3. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY LH (for LH Side)
(a) for Sedan:
(1) Disengage the 2 fasteners.
|
Fastener |
(2) Open the 2 fasteners as shown in the illustration.
|
|
Fastener |
|
(3) Disengage the 5 hooks. |
|
(4) w/ Removable Headrest:
|
Remove in this Direction |
- Disengage the 4 claws and remove the 2 rear seat headrest supports as shown in the illustration.
(5) Remove the rear seatback frame sub-assembly LH from the separate type rear seatback cover with pad as shown in the illustration.
|
|
Remove in this Direction |
4. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH (for LH Side)
(a) for Hatchback:
|
(1) Disengage the hook. |
|
(2) Open the 2 fasteners as shown in the illustration.
|
|
Fastener |
|
(3) Disengage the 5 claws. |
|
(4) Disengage the 2 guides to remove the rear seatback board sub-assembly LH.
5. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)
(a) for Hatchback:
(1) Disengage the 4 claws and remove the 2 rear seat headrest supports as shown in the illustration.
|
|
Remove in this Direction |
(2) Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH as shown in the illustration.
|
|
Remove in this Direction |
6. REMOVE SEPARATE TYPE REAR SEATBACK COVER (for LH Side)
(a) w/ Removable Headrest:
(1) Using a screwdriver, disengage the 10 claws and remove the separate type rear seatback cover from the separate type rear seatback pad as shown in the illustration.
|
*a |
Screwdriver |
- |
- |
(b) w/ Non-removable Headrest:
(1) Using a screwdriver, disengage the 12 claws and remove the separate type rear seatback cover from the separate type rear seatback pad as shown in the illustration.
|
*a |
Screwdriver |
- |
- |
7. REMOVE REAR SEATBACK LOCK RELEASE BUTTON (for LH Side)
(a) for Sedan:
(1) Turn the rear seatback lock release button counterclockwise and remove it.
|
|
Remove in this Direction |
8. REMOVE REAR SEATBACK LOCK ASSEMBLY LH (for LH Side)
(a) for Hatchback:
|
(1) Remove the 2 bolts and rear seatback lock assembly LH. |
|
(b) for Sedan:
|
(1) Remove the 2 nuts and rear seatback lock assembly LH. |
|
9. REMOVE CENTER ARMREST HINGE COVER (for RH Side)
(a) for Hatchback:
(1) Disengage the claw.
|
|
Remove in this Direction |
(2) Disengage the pin and remove the center armrest hinge cover as shown in the illustration.
10. REMOVE NO. 1 SEAT ARMREST CAP (for RH Side)
(a) for Sedan, with Armrest:
|
(1) Disengage the 4 claws to remove the No. 1 seat armrest cap. |
|
11. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY (for RH Side)
(a) w/ Armrest:
|
(1) Remove the bolt and washer or bush. |
|
(2) Disengage the pin and remove the rear seat center armrest assembly as shown in the illustration.
|
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
(3) Remove the bush as shown in the illustration.
|
|
Remove in this Direction |
12. REMOVE REAR SEATBACK HINGE COVER (for RH Side)
(a) for Sedan, with Armrest:
(1) Disengage the claw as shown in the illustration to remove the rear seatback hinge cover.
|
|
Remove in this Direction |
13. REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (for RH Side)
(a) w/ Armrest:
(1) Disengage the 2 claws and 2 guides as shown in the illustration to remove the rear seat center armrest cup holder sub-assembly.
|
|
Remove in this Direction (1) |
|
|
Remove in this Direction (2) |
14. REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE (for RH Side)
(a) for Sedan:
|
(1) Remove the 2 screws. |
|
(2) Disengage the guide and remove the rear seat center shoulder belt guide.
15. REMOVE REAR SEATBACK UPPER LOCK BEZEL RH (for RH Side)
HINT:
Use the same procedure as for the LH side.
16. REMOVE REAR SEAT SHOULDER BELT COVER (for RH Side)
(a) for Hatchback:
|
(1) Disengage the 2 claws and 2 guides to remove the rear seat shoulder belt cover. |
|
17. REMOVE SEAT BELT ANCHOR COVER CAP (for RH Side)
(a) for Hatchback:
(1) Disengage the 2 guides to remove the seat belt anchor cover cap as shown in the illustration.
|
|
Remove in this Direction |
18. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY RH (for RH Side)
(a) for Hatchback:
|
(1) Disengage the hook. |
|
(2) Open the 2 fasteners as shown in the illustration.
|
|
Fastener |
|
(3) Disengage the 9 claws. |
|
(4) Disengage the 2 guides to remove the rear seatback board sub-assembly RH.
19. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY RH (for RH Side)
(a) for Sedan:
(1) Disengage the 3 fasteners.
|
|
Fastener |
(2) Open the 2 fasteners as shown in the illustration.
|
|
Fastener |
|
(3) Disengage the 7 hooks. |
|
(4) w/ Removable Headrest:
|
|
Remove in this Direction |
- Disengage the 4 claws and remove the 2 rear seat headrest supports as shown in the illustration.
(5) Remove the rear seatback frame sub-assembly RH from the separate type rear seatback cover with pad as shown in the illustration.
|
|
Remove in this Direction |
20. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)
(a) for Hatchback:
(1) Disengage the hook.
(2) Disengage the 8 claws and remove the 4 rear seat headrest supports as shown in the illustration.
|
|
Remove in this Direction |
(3) Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly RH as shown in the illustration.
|
|
Remove in this Direction |
21. REMOVE REAR SEAT CENTER LAP TYPE BELT ASSEMBLY (for RH Side)
Click here
![2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - ]; SEAT BELT: REAR CENTER SEAT OUTER BELT ASSEMBLY (for Hatchback): REMOVAL+](/t3Portal/stylegraphics/info.gif)
22. REMOVE SEPARATE TYPE REAR SEATBACK COVER (for RH Side)
(a) w/ Removable Headrest:
|
(1) Disengage the 4 hooks. |
|
(2) Using a screwdriver, disengage the 10 claws and remove the separate type rear seatback cover from the separate type rear seatback pad RH as shown in the illustration.
|
*a |
Screwdriver |
- |
- |
(b) for Non-removable Headrest, without Armrest:
(1) Using a screwdriver, disengage the 14 claws and remove the separate type rear seatback cover from the separate type rear seatback pad RH as shown in the illustration.
|
*a |
Screwdriver |
- |
- |
(c) for Non-removable Headrest, with Armrest:
|
(1) Disengage the 4 hooks. |
|
(2) Using a screwdriver, disengage the 12 claws and remove the separate type rear seatback cover from the separate type rear seatback pad RH as shown in the illustration.
|
*a |
Screwdriver |
- |
- |
23. REMOVE REAR SEATBACK LOCK RELEASE BUTTON (for RH Side)
HINT:
Use the same procedure as for the LH side.
24. REMOVE REAR SEATBACK LOCK ASSEMBLY RH (for RH Side)
HINT:
Use the same procedure as for the LH side.
25. REMOVE CHILD RESTRAINT SEAT COVER
(a) Disengage the 2 claws and 2 guides to remove the child restraint seat cover as shown in the illustration.
|
|
Remove in this Direction |
26. REMOVE CHILD RESTRAINT SEAT BASE COVER
(a) Disengage the 4 claws to remove the child restraint seat base cover as shown in the illustration.
|
|
Remove in this Direction |
HINT:
Use the same procedure for all of the child restraint seat base covers.
27. REMOVE CHILD RESTRAINT SEAT GUIDE CUP
|
(a) Remove the child restraint seat guide cup. HINT: Use the same procedure for all of the child restraint seat guide cups. |
|
28. REMOVE BENCH TYPE REAR SEAT CUSHION COVER
(a) for Gasoline Model:
(1) Disengage the hook.
|
|
Fastener |
(2) Disengage the 2 fasteners.
|
(3) Disengage the 8 hooks. |
|
(4) Disengage the 15 hooks.
(b) for HV Model:
(1) Disengage the hook.
|
|
Fastener |
(2) Disengage the 2 fasteners.
|
(3) Disengage the 8 hooks. |
|
(4) Disengage the 15 hooks.
(c) Using a screwdriver, disengage the 16 claws and remove the bench type rear seat cushion cover from the rear seat cushion pad sub-assembly as shown in the illustration.
|
*a |
Screwdriver |
- |
- |
29. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)
Click here
|
|