Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GNIX |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SENSOR: REMOVAL; 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during blind spot monitor sensor removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function When Necessary Procedures are not Performed
|
Link
|
Blind spot monitor sensor
|
Blind spot monitor beam axis adjustment
|
-
Blind Spot Monitor System (for HV Model)
-
Blind Spot Monitor System (for Gasoline Model)
|
|
PROCEDURE
1. REMOVE REAR BUMPER ASSEMBLY
for Hatchback: Click here
for Sedan: Click here
2. REMOVE BLIND SPOT MONITOR COVER LH (for Sedan)
(a) Disengage the 2 claws to remove the blind spot monitor cover LH as shown in the illustration.
|
Remove in this Direction
|
3. REMOVE BLIND SPOT MONITOR COVER RH (for Sedan)
(a) Disengage the 2 claws to remove the blind spot monitor cover RH as shown in the illustration.
|
Remove in this Direction
|
4. REMOVE BLIND SPOT MONITOR SENSOR LH
(a) Disconnect the connector.
|
|
(b) Remove the 3 nuts and blind spot monitor sensor LH.
NOTICE:
Replace the blind spot monitor sensor LH if it has been dropped or subjected to a severe impact.
5. REMOVE BLIND SPOT MONITOR SENSOR RH
(a) Disconnect the connector.
|
|
(b) Remove the 3 nuts and blind spot monitor sensor RH.
NOTICE:
Replace the blind spot monitor sensor RH if it has been dropped or subjected to a severe impact.
|