2ZR-FXE (ENGINE MECHANICAL): FRONT CRANKSHAFT OIL SEAL: INSTALLATION; 2020 - 2022 MY Corolla Corolla HV [01/2019

Last Modified: 05-13-2024	6.11:8.1.0	Doc ID: RM100000001GMHP
Model Year Start: 2020	Model: Corolla	Prod Date Range: [01/2019 - 09/2022]
Title: 2ZR-FXE (ENGINE MECHANICAL): FRONT CRANKSHAFT OIL SEAL: INSTALLATION; 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]

INSTALLATION

1. INSTALL TIMING CHAIN COVER OIL SEAL

(a) Apply MP grease to the lip of a new timing chain cover oil seal.

NOTICE:

Keep the lip free from foreign matter.

(b) Using SST and a hammer, tap in the timing chain cover oil seal until its surface is flush with the timing chain cover assembly edge.

SST: 09223-22010

Timing Chain Cover Oil Seal Tap in Depth:

-1.0 to 1.0 mm (-0.0394 to 0.0394 in.)

NOTICE:

*a	Tap in Depth

2. INSTALL CRANKSHAFT PULLEY

(a) Align the crankshaft timing gear key with the crankshaft pulley set key groove of the crankshaft pulley.

(b) Using SST to hold the crankshaft pulley in place, tighten the crankshaft pulley set bolt.

SST: 09213-58014

91551-80840

SST: 09330-00021

Torque:

190 N·m {1937 kgf·cm, 140 ft·lbf}

*a	Hold
*b	Turn

3. INSTALL REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY RH

Click here

4. INSPECT FOR OIL LEAK

Click here

5. INSTALL REAR ENGINE UNDER COVER RH

Click here

6. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Click here

7. INSTALL FRONT WHEEL RH

Click here