Last Modified: 07-31-2024 6.11:8.1.0 Doc ID: RM100000001GLNM
Model Year Start: 2020 Model: Corolla Prod Date Range: [01/2019 - 11/2022]
Title: 2ZR-FAE (STARTING): IGNITION SWITCH: INSPECTION; 2020 - 2023 MY Corolla [01/2019 - 11/2022]

INSPECTION

PROCEDURE

1. INSPECT IGNITION OR STARTER SWITCH ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

Between all terminals

LOCK

10 kΩ or higher

6 (ACC) - 7 (AM1)

ACC

Below 1 Ω

6 (ACC) - 7 (AM1) - 8 (IG1)

ON

Below 1 Ω

5 (ST1) - 7 (AM1) - 8 (IG1)

START

Below 1 Ω

If the result is not as specified, replace the ignition or starter switch assembly.

*a

Component without harness connected

(Ignition or Starter Switch Assembly)

*b

LOCK

*c

ACC

*d

ON

*e

START