Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001GLML
Model Year Start: 2020 Model: Corolla Prod Date Range: [01/2019 - 11/2022]
Title: 2ZR-FAE (LUBRICATION): OIL PRESSURE SWITCH: INSTALLATION; 2020 - 2023 MY Corolla [01/2019 - 11/2022]

INSTALLATION

PROCEDURE

1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

(a) Apply adhesive to the area shown in the illustration.

*a

Oil Inlet Port

*b

3 Threads or More

Adhesive Application Area

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

NOTICE:

  • Do not apply adhesive to the oil inlet port of the engine oil pressure switch assembly.
  • Apply the adhesive to the first 3 threads or more of the engine oil pressure switch assembly.
  • Apply adhesive to the entire circumference of the thread.
  • Install the engine oil pressure switch assembly within 3 minutes of applying adhesive.

(b) Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

Torque:

15 N·m {153 kgf·cm, 11 ft·lbf}

NOTICE:

Do not start the engine for at least 1 hour after installation.

(c) Connect the engine oil pressure switch assembly connector.

2. INSPECT FOR ENGINE OIL LEAK

Click here 2020 MY Corolla [01/2019 - 03/2019]; MAINTENANCE: 2ZR-FAE OIL AND OIL FILTER: REPLACEMENT+ 2020 - 2021 MY Corolla [03/2019 - 06/2021]; MAINTENANCE: 2ZR-FAE OIL AND OIL FILTER: REPLACEMENT+ 2022 - 2023 MY Corolla [06/2021 - 11/2022]; MAINTENANCE: 2ZR-FAE OIL AND OIL FILTER: REPLACEMENT+