Last Modified: 07-31-2024 6.11:8.1.0 Doc ID: RM100000001GLIP
Model Year Start: 2020 Model: GR Corolla Prod Date Range: [01/2019 -           ]
Title: PARKING BRAKE: ELECTRIC PARKING BRAKE ACTUATOR: REMOVAL; 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 -        ]

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. PRECAUTION

Click here 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 -        ]; PARKING BRAKE: PARKING BRAKE SYSTEM (w/ Electric Parking Brake): PRECAUTION

2. RELEASE PARKING BRAKE

(a) Move the shift lever to P.

(b) Turn the ignition switch (for Gasoline Model) or power switch (for HV Model) on (IG).

(c) Operate the electric parking brake switch assembly to release the parking brake.

HINT:

If the parking brake cannot be released:

for HV Model: Click here 2020 MY Corolla Corolla HV [01/2019 - 04/2020]; PARKING BRAKE: FORCED RELEASE (for HV Model): OPERATION METHOD 2021 - 2025 MY Corolla Corolla HV [04/2020 -        ]; PARKING BRAKE: FORCED RELEASE (for HV Model): OPERATION METHOD

for Gasoline Model: Click here 2020 MY Corolla Corolla Hatchback GR Corolla [01/2019 - 04/2020]; PARKING BRAKE: FORCED RELEASE (for Gasoline Model): OPERATION METHOD 2021 - 2025 MY Corolla Corolla Hatchback GR Corolla [04/2020 -        ]; PARKING BRAKE: FORCED RELEASE (for Gasoline Model): OPERATION METHOD

(d) Turn the ignition switch (for Gasoline Model) or power switch (for HV Model) off.

3. REMOVE REAR WHEEL

Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 03/2019]; MAINTENANCE: TIRE AND WHEEL: REMOVAL+ 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 09/2022]; MAINTENANCE: TIRE AND WHEEL: REMOVAL 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; MAINTENANCE: TIRE AND WHEEL: REMOVAL

4. DISCONNECT NO. 2 PARKING BRAKE WIRE ASSEMBLY

(a) Disconnect the No. 2 parking brake wire assembly connector from the parking brake actuator assembly.

NOTICE:

  • Remove any dirt or foreign matter on and around the No. 2 parking brake wire assembly connector before performing this step.
  • Do not allow water, oil or dirt to enter the No. 2 parking brake wire assembly connector.

5. REMOVE PARKING BRAKE ACTUATOR ASSEMBLY

(a) Using a 5 mm hexagon socket wrench, remove the 2 bolts and parking brake actuator assembly from the rear disc brake cylinder assembly.

NOTICE:

  • Check for brake fluid leaks on the back side of the rear disc brake cylinder assembly.
  • If there are any brake fluid leaks, replace the rear disc brake cylinder assembly.

(b) Remove the O-ring from the rear disc brake cylinder assembly.