Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GJW1 |
Model Year Start: 2020 |
Model: Corolla |
Prod Date Range: [01/2019 - 11/2022] |
Title: 2ZR-FAE (ENGINE CONTROL): VALVEMATIC SHAFT SENSOR: INSTALLATION; 2020 - 2023 MY Corolla [01/2019 - 11/2022] |
INSTALLATION
PROCEDURE
1. INSTALL VALVEMATIC SHAFT SENSOR (CAM POSITION SENSOR)
(a) Apply a light coat of engine oil to the O-ring of the VALVEMATIC shaft sensor (cam position sensor).
|
|
(b) Install the VALVEMATIC shaft sensor (cam position sensor) to the cylinder head cover sub-assembly with the bolt.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
NOTICE:
-
If the VALVEMATIC shaft sensor (cam position sensor) has been struck or dropped, replace it.
-
Make sure that the O-ring is not cracked or does not move out of place during installation.
(c) Connect the VALVEMATIC shaft sensor (cam position sensor) connector.
2. INSPECT FOR ENGINE OIL LEAK
Click here
|