Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GJW0 |
Model Year Start: 2020 |
Model: Corolla |
Prod Date Range: [01/2019 - 11/2022] |
Title: 2ZR-FAE (ENGINE CONTROL): VALVEMATIC SHAFT SENSOR: REMOVAL; 2020 - 2023 MY Corolla [01/2019 - 11/2022] |
REMOVAL
PROCEDURE
1. REMOVE VALVEMATIC SHAFT SENSOR (CAM POSITION SENSOR)
(a) Disconnect the VALVEMATIC shaft sensor (cam position sensor) connector.
|
|
(b) Remove the bolt and VALVEMATIC shaft sensor (cam position sensor) from the cylinder head cover sub-assembly.
NOTICE:
If the VALVEMATIC shaft sensor (cam position sensor) has been struck or dropped, replace it.
|