| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001GJW0 |
| Model Year Start: 2020 | Model: Corolla | Prod Date Range: [01/2019 - 11/2022] |
| Title: 2ZR-FAE (ENGINE CONTROL): VALVEMATIC SHAFT SENSOR: REMOVAL; 2020 - 2023 MY Corolla [01/2019 - 11/2022] | ||
REMOVAL
PROCEDURE
1. REMOVE VALVEMATIC SHAFT SENSOR (CAM POSITION SENSOR)
|
(a) Disconnect the VALVEMATIC shaft sensor (cam position sensor) connector. |
|
(b) Remove the bolt and VALVEMATIC shaft sensor (cam position sensor) from the cylinder head cover sub-assembly.
NOTICE:
If the VALVEMATIC shaft sensor (cam position sensor) has been struck or dropped, replace it.
|
|