| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001GJDH |
| Model Year Start: 2020 | Model: Corolla | Prod Date Range: [01/2019 - 09/2022] |
| Title: FRONT SUSPENSION: FRONT LOWER SUSPENSION ARM (for ZR Series Engine LH Side): INSTALLATION; 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
For models with hybrid transaxle and manual transaxle, the front lower No. 1 suspension arm sub-assembly LH can be installed without removing the front suspension crossmember sub-assembly.
PROCEDURE
1. TEMPORARILY INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH (for CVT)
|
(a) Temporarily install the front lower No. 1 suspension arm sub-assembly LH to the front suspension crossmember sub-assembly with the 2 bolts and nut. |
|
2. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY (for CVT)
Click here
![2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022]; FRONT SUSPENSION: FRONT SUSPENSION MEMBER: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
3. TEMPORARILY INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH (for Hybrid Transaxle and Manual Transaxle)
|
(a) Temporarily install the front lower No. 1 suspension arm sub-assembly LH to the front suspension crossmember sub-assembly with the 2 bolts and nut. |
|
(b) Connect the front lower No. 1 suspension arm sub-assembly LH to the front lower ball joint assembly LH with the bolt and 2 nuts.
Torque:
89 N·m {908 kgf·cm, 66 ft·lbf}
4. INSTALL FRONT WHEEL (for Hybrid Transaxle and Manual Transaxle)
Click here
5. STABILIZE SUSPENSION
Click here
6. FULLY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH
(a) Using SST, fully tighten the bolt (A).
SST: 09961-01270
|
*a |
Torque Wrench Fulcrum Length |
|
Turn |
Torque:
Specified tightening torque :
240 N·m {2447 kgf·cm, 177 ft·lbf}
HINT:
-
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click here
-
When using SST (fulcrum length of 200 mm (7.87 in.)) + torque wrench (fulcrum length of 600 mm (1.97 ft.)):
180 N*m (1835 kgf*cm, 133 ft.*lbf)
(b) Fully tighten the bolt (B).
Torque:
125 N·m {1275 kgf·cm, 92 ft·lbf}
NOTICE:
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.
7. INSTALL REAR ENGINE UNDER COVER LH (for Hybrid Transaxle and Manual Transaxle)
for 2ZR-FAE: Click here
for 2ZR-FXE: Click here
8. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY (for Hybrid Transaxle and Manual Transaxle)
for 2ZR-FAE: Click here
for 2ZR-FXE: Click here
9. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
Click here
10. PERFORM INITIALIZATION
for Gasoline Model:
|
Lighting System (w/ AFS) (EXT) |
|
|
|