Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GIXT |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [01/2019 - 04/2020] |
Title: SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY (for Sedan): REMOVAL; 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 04/2020] |
REMOVAL
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. REMOVE REAR SEAT ASSEMBLY
Click here
2. REMOVE REAR DOOR SCUFF PLATE LH (for Gasoline Model)
Click here
3. REMOVE REAR DOOR SCUFF PLATE RH (for Gasoline Model)
HINT:
Use the same procedure as for the LH side.
4. REMOVE REAR DOOR SCUFF PLATE LH (for HV Model)
Click here
5. REMOVE REAR DOOR SCUFF PLATE RH (for HV Model)
HINT:
Use the same procedure as for the LH side.
6. REMOVE REAR UNDER SIDE COVER LH (for HV Model)
Click here
7. REMOVE REAR UNDER SIDE COVER RH (for HV Model)
HINT:
Use the same procedure as for the LH side.
8. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH
(a) Disconnect the rear door opening trim weatherstrip LH.
9. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH
HINT:
Use the same procedure as for the LH side.
10. REMOVE REAR SEAT SIDE GARNISH LH
Click here
11. REMOVE REAR SEAT SIDE GARNISH RH
HINT:
Use the same procedure as for the LH side.
12. REMOVE ROOF SIDE INNER GARNISH LH
Click here
13. REMOVE ROOF SIDE INNER GARNISH RH
HINT:
Use the same procedure as for the LH side.
14. REMOVE CENTER STOP LIGHT SET
Click here
15. REMOVE PACKAGE TRAY TRIM BRACKET LH
(a) Disengage the 3 clips and 4 claws to remove the package tray trim bracket LH.
|
|
16. REMOVE PACKAGE TRAY TRIM BRACKET RH
HINT:
Use the same procedure as for the LH side.
17. REMOVE REAR SEAT SHOULDER BELT HOLE COVER
(a) Disengage the 2 claws and 2 guides to remove the rear seat shoulder belt hole cover.
|
|
18. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
(b) Disengage the 5 guides to remove the package tray trim panel assembly.
|
|
19. REMOVE REAR 3 POINT TYPE SEAT OUTER BELT ASSEMBLY LH WITH BRACKET
(a) Remove the bolt to disconnect the floor anchor of the rear 3 point type seat outer belt assembly LH.
|
|
(c) Disengage the guide to remove the rear 3 point type seat outer belt assembly LH with bracket.
20. REMOVE REAR 3 POINT TYPE SEAT OUTER BELT ASSEMBLY RH WITH BRACKET
HINT:
Use the same procedure as for the LH side.
21. REMOVE REAR SEAT BELT RETRACTOR COVER LH
(a) Remove the rear seat belt retractor cover LH.
|
|
22. REMOVE REAR SEAT BELT RETRACTOR COVER RH
HINT:
Use the same procedure as for the LH side.
23. REMOVE REAR 3 POINT TYPE SEAT OUTER BELT ASSEMBLY LH
(a) Hold the rear 3 point type seat outer belt assembly LH with bracket in a vise between aluminum plates.
NOTICE:
Do not overtighten the vise.
(c) Disengage the 2 guides to remove the rear 3 point type seat outer belt assembly LH from the outer belt anchor bracket sub-assembly LH.
24. REMOVE REAR 3 POINT TYPE SEAT OUTER BELT ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
|