Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GIK8 |
Model Year Start: 2020 |
Model: Corolla Hatchback |
Prod Date Range: [01/2019 - 11/2022] |
Title: PARKING BRAKE: PARKING BRAKE CABLE (except G16E-GTS): INSTALLATION; 2020 - 2023 MY Corolla Corolla Hatchback Corolla HV [01/2019 - 11/2022] |
INSTALLATION
PROCEDURE
1. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY
(a) Insert the No. 3 parking brake cable assembly into the vehicle body.
|
|
(b) Install the No. 3 parking brake cable assembly with the 4 bolts and nut.
Torque:
Bolt :
6.0 N·m {61 kgf·cm, 53 in·lbf}
Nut :
15.5 N·m {158 kgf·cm, 11 ft·lbf}
(c) Engage the clip to install the No. 3 parking brake cable assembly to the rear disc brake cylinder assembly.
NOTICE:
Be sure to engage the clip to the rear disc brake cylinder assembly as shown in the illustration.
|
|
*1
|
Rear Disc Brake Cylinder Assembly
|
*a
|
Clip
|
|
|
(d) Connect the No. 3 parking brake cable assembly to the rear disc brake cylinder assembly.
|
|
2. INSTALL PARKING BRAKE LEVER PROTECTOR
(a) Install the parking brake lever protector to the No. 3 parking brake cable assembly.
|
|
3. INSTALL FRONT NO. 2 FLOOR HEAT INSULATOR
(a) Install the front No. 2 floor heat insulator with the 2 nuts.
Torque:
5.0 N·m {51 kgf·cm, 44 in·lbf}
|
|
(b) Install the 4 clips.
4. INSTALL FRONT NO. 1 FLOOR HEAT INSULATOR
(a) Install the front No. 1 floor heat insulator with the 3 nuts.
Torque:
5.0 N·m {51 kgf·cm, 44 in·lbf}
|
|
5. INSTALL FRONT EXHAUST PIPE ASSEMBLY (TWC: Front and Rear Catalyst)
Click here
6. INSTALL PARKING BRAKE CABLE END STOPPER
(a) Engage the 2 claws to install the parking brake cable end stopper and No. 1 parking brake cable assembly to the parking brake equalizer.
|
|
(b) Engage the 2 claws to install the No. 1 parking brake cable assembly to the parking brake cable end stopper.
|
|
7. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY
(a) Pass the No. 1 parking brake cable assembly through the parking brake lever sub-assembly.
(b) Bend down the parking brake lever sub-assembly claw.
|
|
(c) Temporarily install the new No. 1 wire adjusting nut to the No. 1 parking brake cable assembly.
|
|
8. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY
Click here
|