Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GHYM |
Model Year Start: 2020 |
Model: Corolla Hatchback |
Prod Date Range: [01/2019 - 11/2022] |
Title: AXLE AND DIFFERENTIAL: REAR AXLE HUB (for Double Wishbone Type Suspension 2WD without Electric Parking Brake): REMOVAL; 2020 - 2023 MY Corolla Corolla Hatchback Corolla HV [01/2019 - 11/2022] |
REMOVAL
CAUTION / NOTICE / HINT
HINT:
-
Use the same procedure for the RH side and LH side.
-
The following procedure is for the LH side.
PROCEDURE
1. REMOVE REAR WHEEL
Click here
2. LOOSEN NO. 1 WIRE ADJUSTING NUT
Click here
3. REMOVE PARKING BRAKE LEVER PROTECTOR
Click here
4. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY
Click here
5. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY
Click here
6. REMOVE REAR DISC
Click here
7. DISCONNECT SKID CONTROL SENSOR WIRE
(a) Using a screwdriver with its tip wrapped with protective tape, disconnect the skid control sensor wire connector from the rear axle hub and bearing assembly.
NOTICE:
Be careful not to damage the rear axle hub and bearing assembly or connector cover.
|
|
8. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY
(a) Remove the 4 bolts, rear axle hub and bearing assembly and rear disc brake dust cover sub-assembly from the rear axle carrier sub-assembly.
|
|
|