Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GHVV |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: REMOVAL; 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are replaced during millimeter wave radar sensor assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Millimeter wave radar sensor assembly
|
Adjust millimeter wave radar sensor assembly
|
-
Dynamic Radar Cruise Control System (for HV Model)
-
Lane Control System (for HV Model)
-
Road Sign Assist System (for HV Model)
-
Front Radar Sensor System (for HV Model)
-
Pre-collision System (for HV Model)
-
Lighting System (EXT) (for HV Model)
|
|
Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Millimeter wave radar sensor assembly
|
Adjust millimeter wave radar sensor assembly
|
-
Dynamic Radar Cruise Control System (for M20A-FKS)
-
Dynamic Radar Cruise Control System (for 2ZR-FAE)
-
Lane Control System (for Gasoline Model)
-
Road Sign Assist System (for Gasoline Model)
-
Front Radar Sensor System (for Gasoline Model)
-
Pre-collision System (for Gasoline Model)
-
Lighting System (EXT)
|
|
PROCEDURE
1. REMOVE FRONT BUMPER ASSEMBLY (for Hatchback)
Click here
2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (for Hatchback)
(a) Remove the inner radiator grille.
Click here
(b) Remove the 2 bolts and screw.
|
Bolt
|
|
Screw
|
(c) Disengage the 2 guides and remove the millimeter wave radar sensor assembly.
NOTICE:
Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.
3. REMOVE FRONT BUMPER ASSEMBLY (for Sedan)
w/o LED Illumination Light on Front Bumper: Click here
w/ LED Illumination Light on Front Bumper: Click here
4. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (for Sedan)
(a) Remove the inner radiator grille.
w/o LED Illumination Light on Front Bumper: Click here
w/ LED Illumination Light on Front Bumper: Click here
(b) Remove the 2 bolts and screw.
|
Bolt
|
|
Screw
|
(c) Disengage the 2 guides and remove the millimeter wave radar sensor assembly.
NOTICE:
Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.
|