- Dynamic Radar Cruise Control System (for HV Model)
- Lane Control System (for HV Model)
- Road Sign Assist System (for HV Model)
- Front Radar Sensor System (for HV Model)
- Pre-collision System (for HV Model)
- Lighting System (EXT) (for HV Model)
| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001GHVV |
| Model Year Start: 2020 | Model: GR Corolla | Prod Date Range: [01/2019 - 09/2022] |
| Title: CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: REMOVAL; 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are replaced during millimeter wave radar sensor assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
Millimeter wave radar sensor assembly |
Adjust millimeter wave radar sensor assembly |
|
|
Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
Millimeter wave radar sensor assembly |
Adjust millimeter wave radar sensor assembly |
|
|
PROCEDURE
1. REMOVE FRONT BUMPER ASSEMBLY (for Hatchback)
Click here
![2019 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 09/2022]; EXTERIOR PANELS / TRIM: FRONT BUMPER (for Hatchback except GR): REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (for Hatchback)
(a) Remove the inner radiator grille.
Click here
(b) Remove the 2 bolts and screw.
|
Bolt |
|
Screw |
(c) Disengage the 2 guides and remove the millimeter wave radar sensor assembly.
NOTICE:
Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.
3. REMOVE FRONT BUMPER ASSEMBLY (for Sedan)
w/o LED Illumination Light on Front Bumper: Click here
w/ LED Illumination Light on Front Bumper: Click here
4. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (for Sedan)
(a) Remove the inner radiator grille.
w/o LED Illumination Light on Front Bumper: Click here
w/ LED Illumination Light on Front Bumper: Click here
(b) Remove the 2 bolts and screw.
|
|
Bolt |
|
|
Screw |
(c) Disengage the 2 guides and remove the millimeter wave radar sensor assembly.
NOTICE:
Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.
|
|