Last Modified: 07-31-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GGB4 |
Model Year Start: 2020 |
Model: Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: CRUISE CONTROL: FRONT CAMERA SYSTEM (for HV Model): C1AA800; Front Recognition Camera Optical Axis Misalignment Malfunction; 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022] |
DTC
|
C1AA800
|
Front Recognition Camera Optical Axis Misalignment Malfunction
|
DESCRIPTION
The forward recognition camera monitors its optical axis status. If it determines that the optical axis alignment has become misaligned, it will store DTC C1AA800.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
C1AA800
|
Front Recognition Camera Optical Axis Misalignment Malfunction
|
When the forward recognition camera detects an optical axis misalignment when the vehicle is being driven at a speed of 5 km/h (4 mph) or more, after 3 seconds have elapsed since the power switch was turned on (IG).
|
-
Windshield glass
-
Vehicle operating conditions
-
Wheel alignment
|
CAUTION / NOTICE / HINT
NOTICE:
-
When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.
-
If the forward recognition camera has been replaced with a new one, be sure to perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click here
Sequential Recognition: Click here
-
When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket or the forward recognition camera may not operate properly due to a difference in the transmissivity or black ceramic border.
-
Forward recognition camera optical axis may deviate if the vehicle is driven on a banked road, such as a racetrack. This deviation can be corrected by driving the vehicle on a normal road for a while.
-
Forward recognition camera optical axis may deviate when the vehicle is overloaded or the wheel alignment (toe-in) is incorrect. The forward recognition camera optical axis can be corrected by decreasing the load on the vehicle or adjusting the toe-in.
PROCEDURE
1.
|
CHECK FORWARD RECOGNITION CAMERA INSTALLATION
|
(a) Check the installation condition of the forward recognition camera.
Click here
HINT:
If there is deformation or deviation in the forward recognition camera installation bracket, replace the windshield glass.
OK:
No deformation or deviation in forward recognition camera installation bracket.
OK
|
|
|
2.
|
CHECK VEHICLE OPERATING CONDITION
|
(a) Check the operating conditions of the vehicle.
HINT:
Check if a condition which caused the forward recognition camera optical axis to become temporarily misaligned existed, such as if the vehicle was overloaded, towed or modified.
OK:
Vehicle was not overloaded, towed or modified.
OK
|
|
|
(a) Check the front and rear wheel alignment (toe).
-
for front wheel alignment: Click here
-
for rear wheel alignment: Click here
Result
|
Proceed to
|
Front and rear wheels are not misaligned (toe)
|
A
|
Front or rear wheel is misaligned (toe)
|
B
|
A
|
|
|
4.
|
PERFORM FORWARD RECOGNITION CAMERA ADJUSTMENT
|
(a) Perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click here
Sequential Recognition: Click here
NEXT
|
|
|
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs
NEXT |
|
END
|
6.
|
ADJUST WHEEL ALIGNMENT
|
(a) Adjust the alignment (toe) of the wheels.
-
for front wheel alignment: Click here
-
for rear wheel alignment: Click here
NEXT
|
|
|
7.
|
PERFORM FORWARD RECOGNITION CAMERA ADJUSTMENT
|
(a) Perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click here
Sequential Recognition: Click here
NEXT
|
|
|
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs
NEXT |
|
END
|
9.
|
PERFORM FORWARD RECOGNITION CAMERA ADJUSTMENT
|
(a) Return the vehicle to normal operating conditions.
(b) Perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click here
Sequential Recognition: Click here
NEXT
|
|
|
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs
NEXT |
|
END
|
11.
|
REPLACE WINDSHIELD GLASS
|
(a) Replace the windshield glass.
Click here
NEXT
|
|
|
12.
|
PERFORM FORWARD RECOGNITION CAMERA ADJUSTMENT
|
(a) Perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click here
Sequential Recognition: Click here
NEXT
|
|
|
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs
NEXT |
|
END
|
|