Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GCQ7 |
Model Year Start: 2020 |
Model: Corolla |
Prod Date Range: [01/2019 -
] |
Title: HYBRID / BATTERY CONTROL: ACCELERATOR PEDAL SENSOR: REMOVAL; 2020 - 2025 MY Corolla Corolla HV [01/2019 - ] |
REMOVAL
PROCEDURE
1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
2. REMOVE FRONT NO. 1 CONSOLE BOX INSERT
Click here
3. REMOVE ACCELERATOR PEDAL(W/SENSOR) ROD ASSEMBLY
NOTICE:
-
Avoid physical shock to the accelerator pedal sensor assembly.
-
Do not disassemble the accelerator pedal sensor assembly.
-
The accelerator pedal sensor assembly does not require lubrication.
-
Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.
(a) Disengage the wire harness clamp.
|
|
(b) Disconnect the accelerator pedal sensor assembly connector.
|
|
(c) Remove the 3 nuts and accelerator pedal sensor assembly.
NOTICE:
If the accelerator pedal sensor assembly has been struck or dropped, replace it.
|