Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001GCKW |
Model Year Start: 2020 |
Model: Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: HYBRID / BATTERY CONTROL: HYBRID CONTROL SYSTEM (for NICKEL METAL HYDRIDE BATTERY): P160600,P160604; Collision detected or Collision Sensor Connection (Open); 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022] |
DTC
|
P160600
|
Collision detected or Collision Sensor Connection (Open)
|
DTC
|
P160604
|
Collision detected or Collision Sensor Connection (Open) System Internal Failure
|
DTC SUMMARY
MALFUNCTION DESCRIPTION
The hybrid vehicle control ECU and airbag sensor assembly detect that a collision has occurred and shut off the system main relay.
The cause of this DTC may be one of the following:
-
Collision is detected
-
Detection sensor system malfunction
-
Airbag system malfunction
-
Hybrid vehicle control ECU malfunction
-
Communication malfunction between airbag sensor assembly and hybrid vehicle control ECU
-
Hybrid vehicle control ECU communication malfunction
DESCRIPTION
The hybrid vehicle control ECU receives a signal that indicates a collision from the airbag sensor assembly to detect a collision. After detecting a collision, the hybrid vehicle control ECU shuts off the high voltage systems for safety.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
MIL
|
Warning Indicate
|
P160600
|
Collision detected or Collision Sensor Connection (Open)
|
Collision detection
A block signal is received from the airbag sensor assembly.
(1 trip detection logic)
|
-
Airbag sensor assembly
-
Hybrid vehicle control ECU
-
Airbag system
|
Does not come on
|
Master Warning: Comes on
|
P160604
|
Collision detected or Collision Sensor Connection (Open) System Internal Failure
|
Collision detection
Multiple wiring malfunctions occur simultaneously.
(1 trip detection logic)
|
-
Hybrid vehicle control ECU
-
Airbag system
|
Does not come on
|
Master Warning: Comes on
|
HINT:
If P160600 or P160604 is output, the hybrid system cannot be started unless the DTCs are cleared using the Techstream.
Related Data List
DTC No.
|
Data List
|
P160600
|
-
Airbag Status (Collision)
-
Airbag Status (Normal)
|
P160604
|
CONFIRMATION DRIVING PATTERN
HINT:
After repair has been completed, clear the DTCs and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.
Click here
-
Connect the Techstream to the DLC3.
-
Turn the power switch on (IG) and turn the Techstream on.
-
Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
-
Turn the power switch off and wait for 2 minutes or more.
-
Turn the power switch on (IG) and turn the Techstream on.
-
With power switch on (IG) and wait for 5 seconds or more.
-
Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.
-
Check the DTC judgment result.
HINT:
-
If the judgment result shows NORMAL, the system is normal.
-
If the judgment result shows ABNORMAL, the system has a malfunction.
-
If the judgment result shows INCOMPLETE or N/A, perform driving pattern again.
PROCEDURE
1.
|
CHECK VEHICLE FOR COLLISION DAMAGE
|
(a) Check the vehicle condition.
Result
|
Proceed to
|
The vehicle is not damaged
|
A
|
The vehicle is damaged
|
B
|
B |
|
REPAIR VEHICLE
|
A
|
|
|
2.
|
CHECK DTC OUTPUT (HYBRID CONTROL)
|
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
(d) Check for DTCs.
Powertrain > Hybrid Control > Trouble Codes
Result
|
Proceed to
|
P160600 or P160604 only is output, or DTCs except the ones in the table below are also output
|
A
|
Any of the following DTCs including pending DTCs are also output
|
B
|
Malfunction Content
|
Relevant DTC
|
Microcomputer malfunction
|
P060647
|
Hybrid/EV Powertrain Control Module Processor Watchdog / Safety MCU Failure
|
P060687
|
Hybrid/EV Powertrain Control Module Processor to Monitoring Processor Missing Message
|
P060A29
|
Hybrid/EV Powertrain Control Module Monitoring Processor Signal Invalid
|
P060A44
|
Hybrid/EV Powertrain Control Module Monitoring Processor Data Memory Failure
|
P060A45
|
Hybrid/EV Powertrain Control Module Monitoring Processor Program Memory Failure
|
P060A47
|
Hybrid/EV Powertrain Control Module Monitoring Processor Watchdog / Safety MCU Failure
|
P060A49
|
Hybrid/EV Powertrain Control Module Monitoring Processor Internal Electronic Failure
|
P060A87
|
Hybrid/EV Powertrain Control Module Processor from Monitoring Processor Missing Message
|
P060B1C
|
Hybrid/EV Powertrain Control Module A/D Processing Voltage Out of Range
|
P060B49
|
Hybrid/EV Powertrain Control Module A/D Processing Internal Electronic Failure
|
P060B71
|
Hybrid/EV Powertrain Control Module A/D Processing Actuator Stuck
|
P06881F
|
ECM/PCM Power Relay Sense Circuit Intermittent
|
P1C9E9F
|
Hybrid/EV System Reset Stuck Off
|
P1CE31C
|
Hybrid/EV Powertrain Control Module Monitoring Processor A/D Processing Voltage Out of Range
|
P1CE349
|
Hybrid/EV Powertrain Control Module Monitoring Processor A/D Processing Internal Electronic Failure
|
P1CE371
|
Hybrid/EV Powertrain Control Module Monitoring Processor A/D Processing Actuator Stuck
|
HINT:
P160600 or P160604 may be output as a result of the malfunction indicated by the DTCs above.
(e) Turn the power switch off.
A
|
|
|
3.
|
CHECK DTC OUTPUT (HYBRID CONTROL)
|
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
(d) Check for DTCs.
Powertrain > Hybrid Control > Trouble Codes
Result
|
Proceed to
|
P160600 is output
|
A
|
P160604 is output
|
B
|
(e) Turn the power switch off.
B
|
|
|
4.
|
CHECK DTC OUTPUT (HYBRID CONTROL, MOTOR GENERATOR CONTROL)
|
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Enter the following menus: Powertrain / Hybrid Control and Motor Generator / Trouble Codes.
(d) Check for DTCs.
Powertrain > Hybrid Control > Trouble Codes
Powertrain > Motor Generator > Trouble Codes
Result
|
Proceed to
|
DTCs of hybrid control system in the table below are output
|
A
|
DTCs of motor generator control system in the table below are output
|
B
|
System
|
Relevant DTC
|
Hybrid control system
|
P310711
|
Lost Communication with Airbag System Control Module Circuit Short to Ground (Low)
|
P310715
|
Lost Communication with Airbag System Control Module Circuit Short to Auxiliary Battery or Open (High)
|
U015187
|
Lost Communication with Restraints Control Module Missing Message
|
Motor generator control system
|
P312487
|
Lost Communication between Drive Motor "A" and HV ECU Missing Message
|
(e) Turn the power switch off.
|