Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001G7JD |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL; 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022] |
REMOVAL
PROCEDURE
1. REMOVE FRONT WHEEL LH
Click here
2. REMOVE INLET NO. 1 AIR CLEANER (w/ Engine Hood Courtesy Switch)
for M20A-FKS:
Click here
for 2ZR-FAE:
Click here
3. REMOVE FRONT FENDER LINER LH
Click here
4. REMOVE HEADLIGHT ASSEMBLY LH
Click here
5. REMOVE HOOD LOCK ASSEMBLY
(a) w/ Engine Hood Courtesy Switch:
(1) Disconnect the connector.
|
|
(b) for Hatchback:
(1) Using a screwdriver with its tip wrapped with protective tape, remove the hood lock nut cap.
|
|
(2) Remove the 2 bolts and hood lock bolt.
|
|
(c) for Sedan:
(d) Disconnect the hood lock control cable assembly to remove the hood lock assembly.
|
|
6. REMOVE FRONT DOOR SCUFF PLATE LH
Click here
7. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH
Click here
8. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
9. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
(a) Disconnect the hood lock control cable assembly to remove the hood lock control lever sub-assembly.
|
|
10. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Using a screwdriver, disengage each clamp and the grommet as shown in the illustration.
*1
|
Hood Lock Control Cable Assembly
|
-
|
-
|
*a
|
Clamp
|
*b
|
Grommet
|
HINT:
Tape the screwdriver tip before use.
(b) Pull the hood lock control cable assembly from the engine compartment to remove it.
|