Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001G6U4 |
Model Year Start: 2020 |
Model: Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (for HV Model with Dual Knob Type): Display does not Dim when Light Control Switch is Turned ON; 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022] |
Display does not Dim when Light Control Switch is Turned ON
|
CAUTION / NOTICE / HINT
NOTICE:
-
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
-
When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
-
A communication malfunction DTC may be stored.
-
The radio and display receiver assembly may not operate normally.
PROCEDURE
1.
|
CHECK IMAGE QUALITY SETTING
|
(a) Turn the light control switch to the tail or head position.
(b) Check that the daytime screen setting on the display adjustment screen is set to on.
Result
|
Proceed to
|
Daytime screen setting is set to on.
|
A
|
Daytime screen setting is set to off.
|
B
|
A |
|
CHANGE DAYTIME SCREEN SETTING TO OFF
|
B
|
|
|
2.
|
CHECK VEHICLE SIGNAL (OPERATION CHECK)
|
(a) Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check.
Click here
|
|
(b) Check that the display changes between ON and OFF according to the light control switch operation.
OK:
Light Control Switch
|
Display
|
Tail or head
|
ON
|
Off or AUTO
|
OFF
|
HINT:
-
The display is updated once per second. It is normal for the display to lag behind the actual switch operation.
-
Make sure to move the vehicle to a bright area before performing an operation check with the light control switch in the AUTO position.
|