Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001G698 |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [01/2019 - 03/2019] |
Title: DOOR / HATCH: REAR DOOR OPENING TRIM WEATHERSTRIP: INSTALLATION; 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 03/2019] |
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
-
Use the same procedure for the RH side and LH side.
-
The following procedure is for the LH side.
PROCEDURE
1. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP
(a) Align the alignment mark on the rear door opening trim weatherstrip with the flange on the vehicle body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip.
*a
|
Alignment Mark
|
|
Flange Position
|
NOTICE:
-
Make sure to align the alignment mark with the flange when installing the weatherstrip. If the alignment mark is not aligned, water ingress may occur.
-
After installation, check that the corners fit correctly.
HINT:
-
Make sure to install the part of the rear door opening trim weatherstrip near the alignment mark first.
-
The color of the alignment marks on the rear door opening trim weatherstrip LH and rear door opening trim weatherstrip RH are different.
Alignment Mark:
Location
|
Color
|
for Hatchback LH Side
|
Red
|
for Hatchback RH Side
|
Blue
|
for Sedan LH Side
|
Pink
|
for Sedan RH Side
|
Blue
|
2. INSTALL REAR DOOR SCUFF PLATE (for Gasoline Model)
Click here
3. INSTALL REAR DOOR SCUFF PLATE (for HV Model)
Click here
4. INSTALL REAR SEAT CUSHION LOCK HOOK (for Gasoline Model)
w/o Seat Heater System:
Click here
5. INSTALL REAR SEAT CUSHION ASSEMBLY (for Gasoline Model)
w/o Seat Heater System:
Click here
6. CONNECT REAR SEAT CENTER LAP TYPE BELT ASSEMBLY (for Gasoline Model)
w/o Seat Heater System:
Click here
7. INSTALL REAR SEAT ASSEMBLY (for Gasoline Model)
w/ Seat Heater System:
Click here
|