| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001G4YP |
| Model Year Start: 2020 | Model: GR Corolla | Prod Date Range: [01/2019 - ] |
| Title: DOOR / HATCH: LUGGAGE COMPARTMENT DOOR: REASSEMBLY; 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - ] | ||
REASSEMBLY
PROCEDURE
1. INSTALL REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler)
Click here
![2020 - 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 11/2022]; EXTERIOR PANELS / TRIM: REAR SPOILER (for Sedan): INSTALLATION](/t3Portal/stylegraphics/info.gif)
2. INSTALL LICENSE PLATE LIGHT ASSEMBLY
Click here
HINT:
Use the same procedure for the RH side and LH side.
3. INSTALL HOLE PLUG
|
(a) Install 2 new hole plugs. |
|
4. INSTALL LUGGAGE COMPARTMENT DOOR CUSHION
|
(a) Engage the 2 claws to install 2 new luggage compartment door cushions. |
|
5. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear Monitor)
Click here
6. INSTALL LUGGAGE ELECTRICAL KEY SWITCH (w/ Smart Key System)
Click here
7. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
Click here
8. INSTALL REAR LIGHT ASSEMBLY LH
Click here
9. INSTALL REAR LIGHT ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
10. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER RETAINER (w/o Wireless Door Lock System)
|
(a) Engage the guide and 2 claws to install the luggage compartment door lock cylinder retainer. |
|
11. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (w/o Wireless Door Lock System)
|
(a) Install the luggage compartment door lock cylinder assembly with the 2 nuts. Torque: 5.5 N·m {56 kgf·cm, 49 in·lbf} |
|
|
(b) Connect the luggage door lock control cable sub-assembly. |
|
12. INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY (w/o Wireless Door Lock System)
|
(a) Connect the luggage door lock control cable sub-assembly to install it. |
|
13. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY
Click here
14. INSTALL LUGGAGE COMPARTMENT DOOR COVER
|
(a) Install the luggage compartment door cover with the 11 clips. |
|
|
|