Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001G4PY |
Model Year Start: 2020 |
Model: Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for HV Model): B167A,B167E; Front Door Pressure Sensor LH; 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022] |
DTC
|
B167A
|
Front Door Pressure Sensor LH
|
DTC
|
B167E
|
Front Door Pressure Sensor Threshold Malfunction (LH)
|
DESCRIPTION
The side collision sensor LH circuit (bus 1) consists of the airbag sensor assembly, side airbag pressure sensor LH and side No. 2 airbag sensor LH.
The side airbag pressure sensor LH and side No. 2 airbag sensor LH detect impacts to the vehicle and send signals to the airbag sensor assembly to determine if the airbags and pretensioners should be deployed.
These DTCs are stored when a malfunction is detected in the side airbag pressure sensor LH.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
Warning Indicate
|
Test Mode / Check Mode
|
B167A
|
Front Door Pressure Sensor LH
|
-
Side airbag pressure sensor LH malfunction
-
Airbag sensor assembly malfunction
|
-
Side airbag pressure sensor LH
-
Airbag sensor assembly
|
Comes on
|
Does not apply to test/check mode
|
B167E
|
Front Door Pressure Sensor Threshold Malfunction (LH)
|
-
Side airbag pressure sensor LH malfunction
-
Airbag sensor assembly malfunction
|
-
Side airbag pressure sensor LH
-
Airbag sensor assembly
|
Comes on
|
Does not apply to test/check mode
|
WIRING DIAGRAM
Click here
CAUTION / NOTICE / HINT
NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Click here
PROCEDURE
1.
|
CHECK SIDE AIRBAG PRESSURE SENSOR LH
|
(a) Turn the power switch off.
|
|
*1
|
Side Airbag Pressure Sensor RH
|
*2
|
Side No. 2 Airbag Sensor LH
|
|
|
(b) Disconnect the cable from the negative (-) auxiliary battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.
(c) Interchange the side airbag pressure sensor LH with RH and connect the connectors.
(d) Connect the cable to the negative (-) auxiliary battery terminal.
(e) Turn the power switch on (IG), and wait for at least 60 seconds.
(f) Clear the DTCs stored in memory.
Body Electrical > SRS Airbag > Clear DTCs
(g) Turn the power switch off.
(h) Turn the power switch on (IG), and wait for at least 60 seconds.
(i) Check for DTCs.
Body Electrical > SRS Airbag > Trouble Codes
HINT:
Codes other than DTCs B166C, B166F, B167A and B167E may be output at this time, but they are not related to this check.
Result
|
Proceed to
|
DTC B167A or B167E is output.
|
A
|
DTC B166C or B166F is output.
|
B
|
DTCs B166C, B166F, B167A and B167E are not output.
|
C
|
(j) Turn the power switch off.
(k) Disconnect the cable from the negative (-) auxiliary battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.
(l) Return the side airbag pressure sensor LH and RH to their original positions and connect the connectors.
|