Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001G4PB |
Model Year Start: 2020 |
Model: Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for HV Model): VEHICLE CONTROL HISTORY; 2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022] |
VEHICLE CONTROL HISTORY
Function Overview
(a) The vehicle control history is a function that records control data (record data) when triggered by specific vehicle behavior or user input. Checking the vehicle control history may provide, quantitative diagnostic information that can be used as a reference to proceed with a malfunction diagnosis. However, due to limitations of the data recorded, such as the resolution, data range, sampling interval, time period of the recording, and the items recorded, the information provided by this data may not be sufficient to capture the entire event. Data storage properties may also affect the way data is output.
(b) The vehicle control history may also stores image data when a specific trigger is set.
(c) The vehicle control history is recorded in different storage areas designated by trigger group and it is possible to save up to 140 items in total. Newer events with Vehicle Control History "VCH"/ Freeze Frame Data "FFD" may overwrite data from past events.
(d) Each trigger receives time information from the main body ECU (time elapsed since power switch turned on (IG)) or the navigation system* (absolute time).
-
*: Only for factory-installed navigation systems (factory option)
(e) Data is recorded in the airbag sensor assembly EEPROM. Even if the negative (-) auxiliary battery terminal is disconnected, the vehicle control history is available. Also, data cannot be cleared using Techstream.
(f) The image data is stored in the camera sensor EEPROM.
Notices for Use
(a) Vehicle control history is used as support information during diagnosis for each system.
(b) Trigger data is based on signals from sensors and actuators (recognition value of each ECU).
Basic Flow
Trigger Item
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Using the Techstream, enter the following menus: Body Electrical / SRS Airbag / Utility / Vehicle Control History.
Body Electrical > SRS Airbag > Utility
Tester Display
|
Vehicle Control History
|
Trigger Item Chart
Related System
|
Storage Area Group (storage limit)
|
Trigger Item Name
|
Trigger Description
|
Image Recording
|
Remarks
|
Engine control/Hybrid control/Automatic transmission
|
Area 2
(Approximately 42 times)
|
Accelerator pedal opening angle signal is high during low speed
|
An accelerator high position signal condition continues for a certain period of time while in the low speed range.
|
-
|
-
|
Accelerator pedal opening angle signal is high immediately after brake pedal is released
|
An accelerator high position signal is received while in the low speed range after there is a change from brake input condition to brake and accelerator pedal released condition.
|
-
|
-
|
Area 7
(Approximately 12 times)
|
Accelerator high position in mid to high speed
|
An accelerator high position signal condition continues for a certain period of time while in the mid to high speed range.
|
-
|
-
|
Engine control/Hybrid control/Automatic transmission
|
Area 3
(Approximately 40 times)
|
Accelerator pedal opening angle is medium or higher immediately after shifting to R
|
An accelerator mid to high position signal is received while in the low speed range immediately after the shift lever is moved to R during an accelerator low position signal condition.
|
-
|
Excluding hybrid vehicles
|
Accelerator pedal opening angle is medium or higher immediately after shifting to forward position
|
An accelerator mid to high position signal is received while in the low speed range immediately after the shift lever is moved to a forward position (a position other than P, N or R) during an accelerator low position signal condition.
|
-
|
Excluding hybrid vehicles
|
Accelerator pedal opening angle is medium or higher immediately after shifting to driving position
|
An accelerator mid to high position signal is received while in the low speed range immediately after the shift lever is moved to a driving position (a position other than P or N) during an accelerator low position signal condition.
|
-
|
Only hybrid vehicles
|
R position signal input during medium or higher accelerator signal input
|
An accelerator mid to high position signal condition while the shift lever is in R continues for a certain period of time after the shift lever is moved to R during an accelerator mid to high position signal condition.
|
-
|
Excluding hybrid vehicles
|
Forward position signal input during medium or higher accelerator signal input
|
An accelerator mid to high position signal condition continues for a certain period of time while in a forward position (a position other than P, N or R) after shifting to a forward position (a position other than P, N, or R) during an accelerator mid to high position signal condition.
|
-
|
Excluding hybrid vehicles
|
Engine control/Hybrid control/Automatic transmission
|
Area 3
(Approximately 40 times)
|
Driving position signal input during medium or higher accelerator signal input
|
The shift lever is moved to a driving position (a position other than P or N) during an accelerator mid to high position signal condition.
|
-
|
Only hybrid vehicles
|
Accelerator signal and brake signal input simultaneously
|
An accelerator mid to high position signal condition and brake input condition simultaneously continue for a certain period of time.
|
-
|
-
|
Medium or higher accelerator signal input immediately after switching to D or R
|
The shift lever is moved to D (or R) during an accelerator low signal condition after the shift lever is moved to R (or D). After that, an accelerator mid to high position signal is received.
|
-
|
-
|
Medium or higher accelerator signal input during N
|
An accelerator mid to high position signal is received while in a low speed range after the shift lever is moved to N.
|
-
|
-
|
Brake control
|
Area 5
(Approximately 5 times)
|
VSC operation history
|
When VSC operation starts.
|
-
|
Only for vehicles with VSC
|
TRC operation history
|
When TRC operation starts.
|
-
|
Only for vehicles with TRC
|
ABS operation history
|
When ABS operation starts.
|
-
|
-
|
Area 11
(Approximately 2 times)
|
SCB operation history
|
The SCB (second crash brake) operates.
|
-
|
Only for vehicles with SCB
|
Area 1
(Approximately 4 times)
|
Sudden braking history
|
Detects forward and backward acceleration above a certain level.
|
○
|
Only for vehicles with VSC
|
Sudden turning history
|
Detects lateral acceleration above a certain level.
|
○
|
Only for vehicles with VSC
|
Cruise control
|
Area 4
(Approximately 15 times)
|
Accelerator pedal opening angle signal is high during cruise control operation
|
An accelerator high position signal condition continues for a certain period of time during cruise control.
|
-
|
Only for vehicles with cruise control
|
Stop assist history (shift to deceleration phase)
|
Stop support function operation history (decelerating stop transition).
|
-
|
Only for vehicles with stop assist function
|
Stop assist history (shift to stop phase)
|
Stop support function operation history (stop hold transition).
|
-
|
Only for vehicles with stop assist function
|
Stop assist history (cancelation from warning phase)
|
Stop support function operation history (cancellation from warning phase).
|
-
|
Only for vehicles with stop assist function
|
Stop assist history (cancelation from speed restraint phase)
|
Stop support function operation history (cancellation from speed control phase).
|
-
|
Only for vehicles with stop assist function
|
Stop assist history (cancelation from deceleration phase)
|
Stop support function operation history (cancellation from decelerating stop phase).
|
-
|
Only for vehicles with stop assist function
|
Stop assist history (cancelation from stop phase)
|
Stop support function operation history (cancellation from stopped on hold phase).
|
-
|
Only for vehicles with stop assist function
|
Pre-collision
|
Area 6
(Approximately 10 times)
|
PCS operation history (warning buzzer operation)
|
PCS (warning buzzer) operates.
|
-
|
Only for vehicles with PCS
|
PCS operation history (warning brake operation)
|
PCS (brake alarm) operates.
|
-
|
Only for vehicles with PCS (w/ Driver Monitor Camera)
|
PCS operation history (pre-collision brake assist operation)
|
PCS (PCS brake assist) operates.
|
○
|
Only for vehicles with PCS
|
PCS operation history (prior brake operation)
|
PCS (preliminary braking) operates.
|
○
|
Only for vehicles with PCS
|
PCS operation history (pre-collision brake operation)
|
PCS (PCS brake) operates.
|
○
|
Only for vehicles with PCS
|
PCS operation history (pre-collision seat belt operation)
|
PCS (PCS seat belt) operates.
|
-
|
Only for vehicles with PCS
|
PCS operation history (pre-pump operation)
|
PCS (PCS brake assist standby) operates.
|
-
|
Only for vehicles with PCS
|
PCS operation history (PBR operation)
|
PCS (stop light illumination) operates.
|
-
|
Only for vehicles with PCS
|
PCS operation history (PBH operation)
|
PCS (after operation brake hold) operates.
|
-
|
Only for vehicles with PCS
|
PCS operation history (avoidance support)
|
PCS (evasion support) operates.
|
-
|
Only for vehicles with PCS
|
PCS operation history (when acceleration above certain amount is detected)
|
Forward and backward acceleration above a certain amount is detected.
|
○
|
Only for vehicles with PCS
|
PCS operation history (request combined steering)
|
Steering assist is requested.
|
-
|
Only for vehicles with PCS
|
PCS operation history (caution operation)
|
PCS warning operates.
|
-
|
Only for vehicles with PCS
|
Pedestrian protection system over constant pressure sensor signal input
|
Pressure sensor signal input above a certain amount is detected.
|
○
|
Only for vehicles with Pedestrian Protection System
|
PCS operation history (side airbag operation request)
|
Side airbag prevention-linked function operates.
|
-
|
Only for vehicles with PCS
|
Lane departure alert/Lane-keeping assist
|
Area 8
(Approximately 12 times)
|
Torque sensor signal above certain amount is detected during LKA/LDA operation
|
When the LKA/LDA/LTA system is ON, a torque sensor signal above a certain amount is detected.
|
○
|
Only for vehicles with LKA/LDA (w/ Steering Control)/LTA
|
Lane change assist operation history
|
Lane change assist operates.
|
-
|
Only for vehicles with LCA
|
Intelligent clearance sonar
|
Area 9
(Approximately 6 times)
|
ICS operation history (output limit)
|
ICS (output restriction) operates.
|
-
|
Only for vehicles with ICS
|
ICS operation history (max output limit)
|
ICS (maximum output restriction) operates.
|
○
|
Only for vehicles with ICS
|
ICS operation history (brake control)
|
ICS (brake control) operates.
|
○
|
Only for vehicles with ICS
|
ICS operation history (stop)
|
ICS (vehicle stop) operates.
|
-
|
Only for vehicles with ICS
|
ICS operation history (regression)
|
ICS (return) operates.
|
-
|
Only for vehicles with ICS
|
ICS operation history (temporarily not available)
|
ICS is temporarily not available.
|
-
|
Only for vehicles with ICS
|
FHL
|
Area 10
(Approximately 3 times)
|
FHL operation history
|
Proximity warning for rear vehicles operates.
|
-
|
Only for vehicles with FHL
|
Record Data Items
(a) When a trigger is detected, the vehicle status (ECU data) before and after the trigger are simultaneously recorded as record data.
(b) Recording time and record data differ for each trigger.
(c) The sampling cycle and recording time for the record data and image data is not always the same.
When not "PCS/ICS Operation History"
When "PCS/ICS Operation History"
Record Data Specifications
Trigger Item
|
Record Data
|
Before Detection
|
After Detection
|
Sampling Cycle (sec.)
|
ID No.
|
Item
|
Recording Time (sec.)
|
Number of Points
|
Recording Time (sec.)
|
Number of Points
|
2
|
Accelerator pedal opening angle signal is high during low speed
|
7.5
|
15
|
7.5
|
16
|
0.5
|
3
|
Accelerator high position in mid to high speed
|
7.5
|
15
|
7.5
|
16
|
0.5
|
4
|
Accelerator pedal opening angle signal is high immediately after brake pedal is released
|
7.5
|
15
|
7.5
|
16
|
0.5
|
5-1
|
Accelerator pedal opening angle is medium or higher immediately after shifting to R
|
5
|
10
|
5
|
11
|
0.5
|
5-2
|
Accelerator pedal opening angle is medium or higher immediately after shifting to forward position
|
5-3
|
Accelerator pedal opening angle is medium or higher immediately after shifting to driving position
|
6-1
|
R position signal input during medium or higher accelerator signal input
|
5
|
10
|
5
|
11
|
0.5
|
6-2
|
Forward position signal input during medium or higher accelerator signal input
|
6-3
|
Driving position signal input during medium or higher accelerator signal input
|
8
|
Accelerator signal and brake signal input simultaneously
|
5
|
10
|
5
|
11
|
0.5
|
9
|
Medium or higher accelerator signal input immediately after switching to D or R
|
5
|
10
|
5
|
11
|
0.5
|
10
|
Medium or higher accelerator signal input during N
|
5
|
10
|
5
|
11
|
0.5
|
12
|
VSC operation history
|
5
|
34
|
5
|
35
|
0.15
|
13
|
TRC operation history
|
5
|
34
|
5
|
35
|
0.15
|
14
|
ABS operation history
|
5
|
34
|
5
|
35
|
0.15
|
15
|
Sudden braking history
|
5
|
34
|
5
|
35
|
0.15
|
16
|
Sudden turning history
|
5
|
34
|
5
|
35
|
0.15
|
17
|
Accelerator pedal opening angle signal is high during cruise control operation
|
5
|
10
|
5
|
11
|
0.5
|
18-1
|
PCS operation history (warning buzzer operation)
|
5
|
10
|
4
|
9
|
0.5
|
18-2
|
PCS operation history (warning brake operation)
|
18-3
|
PCS operation history (pre-collision brake assist operation)
|
18-4
|
PCS operation history (prior brake operation)
|
18-5
|
PCS operation history (pre-collision brake operation)
|
18-6
|
PCS operation history (pre-collision seat belt operation)
|
18-7
|
PCS operation history (pre-pump operation)
|
18-8
|
PCS operation history (PBR operation)
|
18-9
|
PCS operation history (PBH operation)
|
18-10
|
PCS operation history (avoidance support)
|
18-11
|
PCS operation history (when acceleration above certain amount is detected)
|
18-12
|
PCS operation history (request combined steering)
|
18-13
|
PCS operation history (caution operation)
|
18-14
|
Pedestrian protection system over constant pressure sensor signal input
|
18-15
|
PCS operation history (side airbag operation request)
|
19
|
Torque sensor signal above certain amount is detected during LKA/LDA operation
|
8
|
20
|
0
|
1
|
0.4
|
20-1
|
ICS operation history (output limit)
|
5
|
10
|
5
|
11
|
0.5
|
20-2
|
ICS operation history (max output limit)
|
20-3
|
ICS operation history (brake control)
|
20-4
|
ICS operation history (stop)
|
20-5
|
ICS operation history (regression)
|
20-6
|
ICS operation history (temporarily not available)
|
22
|
Lane change assist operation history
|
8
|
20
|
0
|
1
|
0.4
|
23
|
FHL operation history
|
5
|
25
|
3
|
16
|
0.2
|
24
|
SCB operation history
|
5
|
34
|
5
|
35
|
0.15
|
26-1
|
Stop assist history (shift to deceleration phase)
|
2
|
4
|
5
|
11
|
0.5
|
26-2
|
Stop assist history (shift to stop phase)
|
26-3
|
Stop assist history (cancelation from warning phase)
|
26-4
|
Stop assist history (cancelation from speed restraint phase)
|
26-5
|
Stop assist history (cancelation from deceleration phase)
|
26-6
|
Stop assist history (cancelation from stop phase)
|
Image Data Specifications
Trigger Item
|
Record Data
|
Before Detection
|
After Detection
|
Sampling Cycle (sec.)
|
ID No.
|
Item
|
Recording Time (sec.)
|
Number of Points
|
Recording Time (sec.)
|
Number of Points
|
15
|
Sudden braking history
|
6
|
10
|
6
|
10
|
0.6
|
16
|
Sudden turning history
|
6
|
10
|
6
|
10
|
0.6
|
18-3
|
PCS operation history (pre-collision brake assist operation)
|
6
|
10
|
6
|
10
|
0.6
|
18-4
|
PCS operation history (prior brake operation)
|
18-5
|
PCS operation history (pre-collision brake operation)
|
18-11
|
PCS operation history (when acceleration above certain amount is detected)
|
18-14
|
Pedestrian protection system over constant pressure sensor signal input
|
19
|
Torque sensor signal above certain amount is detected during LKA/LDA operation
|
6
|
10
|
6
|
10
|
0.6
|
20-2
|
ICS operation history (max output limit)
|
6
|
10
|
6
|
10
|
0.6
|
20-3
|
ICS operation history (brake control)
|
Record Data Chart
Item Name
|
Trigger ID No.
|
Vehicle Speed
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Accelerator Opening Ratio
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Engine RPM Data
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Cruise Control
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Shift Position Signal
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Brake SW
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Brake Oil Pressure
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Yaw Rate Sensor Signal
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Longitudinal G Sensor Signal
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Lateral G Sensor Signal
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Throttle Opening Ratio
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Command Value of Fuel Injection Amount
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Steering Signal
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
HV Recognition Flag
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Diesel Flag
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Sensor Type Identification (Security)
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Sensor Type Identification (G Sensor Layout)
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Sensor Type Identification (G Sensor)
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Sensor Type Identification (Yaw Rate Sensor)
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Yaw G Sensor Installation Information
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15, 19, 20-1, 20-2, 20-3, 20-4, 20-5, 20-6, 22, 23, 24, 26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Shift Gear
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 15, 16
|
Power Train Mode
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 15, 16
|
SNOW Mode
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 15, 16
|
Valid/Invalid of Driving Mode
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 15, 16
|
VSC OFF Lamp
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 15, 16
|
TRC OFF Lamp
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 15, 16
|
Valid/Invalid of TRC/VSC OFF Lamp
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 15, 16
|
EV Mode
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 15, 16
|
Valid/Invalid of EV Mode
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 15, 16
|
Drive Mode Select Signal
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 15, 16
|
Engine Load Factor
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10
|
READY Signal
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 12, 13, 15, 16
|
Gear Position Signal
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 15, 16
|
Turbine RPM/Input Shaft RPM
|
2, 3, 4, 5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10, 15, 16
|
Under DSC Control
|
5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10
|
Under BOS Control
|
5-1, 5-2, 5-3, 6-1, 6-2, 6-3, 8, 9, 10
|
Under SCB Control
|
24
|
Under VSC Control
|
12, 13, 14, 15, 16, 24
|
Under ABS Control
|
12, 13, 14, 15, 16, 24
|
Under VDM Control
|
12, 13, 14, 15, 16, 24
|
Under TRC Operation Flag
|
12, 13, 14, 15, 16, 24
|
FR Wheel Speed
|
12, 13, 14, 15, 16, 23, 24
|
FL Wheel Speed
|
12, 13, 14, 15, 16, 23, 24
|
RR Wheel Speed
|
12, 13, 14, 15, 16, 23, 24
|
RL Wheel Speed
|
12, 13, 14, 15, 16, 23, 24
|
Cruise System
|
17
|
Driving Force Demand Judgment Flag
|
17
|
Cruise Control Master Switch Flag
|
17
|
DSS Judgment Flag
|
17
|
Cruise Control Res/Accel SW
|
17
|
Cruise Control Set/Coast SW
|
17
|
Cruise Control Cancel SW
|
17
|
Cruise Control Brake SW
|
17
|
Cruise Control D Signal
|
17
|
Cruise Control Main SW
|
17
|
Cruise Control Set Speed
|
17
|
Vehicle Speed (during Cruise Control)
|
17
|
Cruise Control Request Value
|
17
|
ACC Target Distance
|
17
|
ACC Target Condition
|
17
|
ACC Relative Speed
|
17
|
PCS Reception Data Invalid Flag
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
ALM Request Flag
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
ALM Request Flag 2
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
ABK Request Flag
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PBA Request Flag
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
FPB Request Flag
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PB Request Flag
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PSB Request Flag
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Prefill Request Flag
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Stop Lamp Lighting Request Flag
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS Brake Hold Request Flag
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Collision Avoidance Assist Request Flag 1
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Collision Avoidance Assist Request Flag 2
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Collision Avoidance Assist Request Flag 3
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS SW
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS Display (Diag Condition)
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS Display (Milli Wave Dirt)
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS Display (Temporarily not available)
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS Display (Sensor Recognition Status)
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS Display (Milli-Meter Wave Radar Low Voltage Status)
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS Display (Camera Backlight Status)
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS Display (Milli-Meter Wave Radar Alignment Flag)
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS Display (Object Recognition Status)
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS Display (Control Status 1)
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS Display (Control Status 2)
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Target Distance
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Target Relative Velocity
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Target Lateral Position
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Target Object Number
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Relative Acceleration for Control Target
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Predicted Time to Collision 1 for Control Target
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Predicted Time to Collision 2 for Control Target
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Predicted Time to Collision Status for Control Target
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Sensor Recognition Status for Control Target
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Type of the Object for Control Target
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS ALM Mode Status
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS ALM Status
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS Guard Status A
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS Guard Status B
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS Guard Status C
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Sensor Recognition Status (Vertical Axis Offset Status of Milli-Meter Wave Radar)
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Sensor Recognition Status (Horizontal Axis Offset Status of Milli-Meter Wave Radar)
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Estimated Curve Radius
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Over Constant Longitudinal G Sensor Signal Value Detection
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Over Constant Lateral G Sensor Signal Value Detection
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Over Constant RR or RA Value Detection
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
ASP-PCS Reception Data Invalid Flag
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PST Request Flag
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
CAU Request Flag
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Kind of PCS System
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Outside Lane Status
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
SCS Steering Angle
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Camera Load Face Detection
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Side Radar Target Object Number
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
CAU Operation Pattern
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PCS Status2
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Predicted Time to Collision for Side Radar Control Target
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Type of the Object for Side Radar Control Target
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Estimated Cross Time for Side Radar Control Target
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Caution SW
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Side Radar Target Relative Velocity X
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Caution Display
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Side Radar Target Relative Velocity Y
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Side Radar Target Distance X
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Side Radar Target Distance Y
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Collision Point
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
SDV Request Flag
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PST Target Lateral Position
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PST Target Distance
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PST Target Collision Lateral Position
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Rear Side Object Status
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PST ETTC
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
PST Obstacle Status
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Time to Lane Crossing
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Pedestrian Protection System Record Trigger Signal
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Pedestrian Protection System Maximum Pressure Ratio (LH)
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Pedestrian Protection System Maximum Pressure Ratio (RH)
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Pedestrian Protection System Vehicle Speed for Calculation
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Rear Pop-Up Hood ECU Judgment Status
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Front Pop-Up Hood ECU Judgment Status
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
Pedestrian Protection Airbag ECU Judgment Status
|
18-1, 18-2, 18-3, 18-4, 18-5, 18-6, 18-7, 18-8, 18-9, 18-10, 18-11, 18-12, 18-13, 18-14, 18-15
|
LKA DDR Trigger Signal
|
19
|
Invalid of LKA DDR Data
|
19
|
Steering Wheel Release Condition
|
19
|
Steering Operation of LKA
|
19
|
Steering Operation of LDA
|
19
|
LKA Control Condition (EPS Control)
|
19
|
LKA Control Condition
|
19
|
Turn Signal Operation
|
19
|
EPS Torque Sensor Value
|
12, 13, 14, 15, 16, 19
|
LTA Trigger Signal
|
19
|
LTA DDR Reception Status
|
19
|
LTA Steering Wheel Hold Condition
|
19
|
Steering Operation of LTA
|
19
|
LTA Control Condition
|
19
|
LTA EPS Pinion Angle
|
19
|
LTA Leading Vehicle Following
|
19
|
LTA Leading Vehicle Departure
|
19
|
LCA Trigger Signal
|
22
|
LCA Data Reception Status
|
22
|
LCA Steering Override Trigger
|
22
|
LCA Proximity Warning Trigger
|
22
|
LCA Brake Override Trigger
|
22
|
LCA Distance of Adjacent Forward Vehicle
|
22
|
LCA Relative Speed of Adjacent Forward Vehicle
|
22
|
LCA Distance of Adjacent Backward Vehicle
|
22
|
LCA Relative Speed of Adjacent Backward Vehicle
|
22
|
LCA Distance of Forward Vehicle
|
22
|
LCA Relative Speed of Forward Vehicle
|
22
|
LCA Control State
|
22
|
LCA Judgment (RH)
|
22
|
LCA Judgment (LH)
|
22
|
Turn Signal State
|
22
|
LCA Left Lane Marker Kind
|
22
|
LCA Right Lane Marker Kind
|
22
|
LCA Left Lane Marker Position
|
22
|
LCA Right Lane Marker Position
|
22
|
LCA Yaw Angle
|
22
|
LCA Curvature
|
22
|
ICS Received Data Invalid Flag
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Trigger Flag
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Temporarily Not Available (Low Voltage)
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Temporarily Not Available (Dirt)
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Request Driving Force Control Flag
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Request Braking Control Flag
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Controlled Object Distance
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Controlled Object 1 Position (X)
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Controlled Object 1 Position (Y)
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Recognition Sensor (Controlled Object 1)
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Recognition Level (Controlled Object 1)
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Controlled Object 2 Position (X)
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Controlled Object 2 Position (Y)
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Recognition Sensor (Controlled Object 2)
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Recognition Level (Controlled Object 2)
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Controlled Object 3 Position (X)
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Controlled Object 3 Position (Y)
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
Operation Function
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
ICS Recognition Level (Controlled Object 3)
|
20-1, 20-2, 20-3, 20-4, 20-5, 20-6
|
FHL Request Flag
|
23
|
FHL Status
|
23
|
FHL1 Object Distance Y
|
23
|
FHL1 Object Distance X
|
23
|
FHL1 Relative Speed Y
|
23
|
FHL1 Relative Speed X
|
23
|
FHL1 RCS Level
|
23
|
FHL1 TTC
|
23
|
FHL1 (New Target Flag)
|
23
|
FHL1 (Detecting Radar)
|
23
|
FHL1 (Operating Trigger Flag)
|
23
|
FHL1 (Ghosting Flag)
|
23
|
FHL1 (Extrapolating Flag)
|
23
|
FHL1 (Radar Blockage Ratio Flag)
|
23
|
FHL1 (Radar Distortional Flag)
|
23
|
FHL1 (Adjacent Reflection Flag)
|
23
|
FHL1 (CAN Received Data)
|
23
|
FHL1 ID
|
23
|
FHL2 Object Distance Y
|
23
|
FHL2 Object Distance X
|
23
|
FHL2 Relative Speed Y
|
23
|
FHL2 Relative Speed X
|
23
|
FHL2 RCS Level
|
23
|
FHL2 TTC
|
23
|
FHL2 (New Target Flag)
|
23
|
FHL2 (Detecting Radar)
|
23
|
FHL2 (Operating Trigger Flag)
|
23
|
FHL2 (Ghosting Flag)
|
23
|
FHL2 (Extrapolating Flag)
|
23
|
FHL2 (Radar Blockage Ratio Flag)
|
23
|
FHL2 (Radar Distortional Flag)
|
23
|
FHL2 (Adjacent Reflection Flag)
|
23
|
FHL2 (CAN Received Data)
|
23
|
FHL2 ID
|
23
|
FHL3 Object Distance Y
|
23
|
FHL3 Object Distance X
|
23
|
FHL3 Relative Speed Y
|
23
|
FHL3 Relative Speed X
|
23
|
FHL3 RCS Level
|
23
|
FHL3 TTC
|
23
|
FHL3 (New Target Flag)
|
23
|
FHL3 (Detecting Radar)
|
23
|
FHL3 (Operating Trigger Flag)
|
23
|
FHL3 (Ghosting Flag)
|
23
|
FHL3 (Extrapolating Flag)
|
23
|
FHL3 (Radar Blockage Ratio Flag)
|
23
|
FHL3 (Radar Distortional Flag)
|
23
|
FHL3 (Adjacent Reflection Flag)
|
23
|
FHL3 (CAN Received Data)
|
23
|
FHL3 ID
|
23
|
Stop Assist Invalid Flag
|
26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Stop Assist Steering Wheel Release Condition
|
26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Stop Assist Horn Request
|
26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Stop Assist Hazard Request
|
26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Stop Assist Helpnet Connection
|
26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Stop Assist Door Unlock Request
|
26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Stop Assist System Phase
|
26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Stop Assist Brake State
|
26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Stop Assist Speed Restraint Phase Counter
|
26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Stop Assist Shift to Deceleration Phase
|
26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Stop Assist Shift to Stop Phase
|
26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Stop Assist User Cancel
|
26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Stop Assist Automatic Cancel
|
26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Stop Assist Accelerator Pedal Angle
|
26-1, 26-2, 26-3, 26-4, 26-5, 26-6
|
Record Data Item Chart
Tester Display
|
Measurement Item
|
Range
|
Diagnostic Note
|
Vehicle Speed
|
Vehicle speed at main driven wheels
|
0 to 200 km/h
|
If the vehicle speed is 200 km/h or more, "200 km/h" is displayed.
|
Accelerator Opening Ratio
|
Accelerator pedal opening angle
|
0.0 to 100.0%
|
-
|
Engine RPM Data
|
Number of crankshaft revolutions in 1 minute
|
0 to 12800 rpm
|
-
|
Cruise Control
|
Cruise control condition
|
ON: Cruise control operating
OFF: Cruise control not operating or not equipped
|
If the vehicle is not equipped with cruise control, OFF is displayed.
|
Shift Position Signal
|
Shift lever position
|
N / D / R / P / 5 / 4 / 3 / 2 / LO / B / SD / S-Mode / Undetermined
|
-
|
Brake SW
|
Stop light switch condition
|
ON: Stop lights illuminated
OFF: Stop lights not illuminated
|
-
|
Brake Oil Pressure
|
Brake fluid pressure inside master cylinder
|
0.000 to 12.144 MPa
|
-
|
Yaw Rate Sensor Signal
|
Angular velocity of the vehicle when turning
|
-61.000 to 61.000 deg/s
|
-
A positive value is displayed when turning left.
-
If the value is 61 deg/s or more, "61.000 deg/s" is displayed.
-
If the value is -61 deg/s or less, "-61.000 deg/s" is displayed.
|
Longitudinal G Sensor Signal
|
Longitudinal acceleration measured by acceleration sensor for VSC system
|
-8.97250 to 8.97250 m/s2
|
-
A positive value is displayed when acceleration is increasing.
-
If the value is 8.9725 m/s2 or more, "8.97250 m/s2" is displayed.
-
If the value is -8.9725 m/s2 or less, "-8.97250 m/s2" is displayed.
|
Lateral G Sensor Signal
|
Lateral acceleration measured by acceleration sensor for VSC system
|
-8.97250 to 8.97250 m/s2
|
-
A positive value is displayed when turning left.
-
If the value is 8.9725 m/s2 or more, "8.97250 m/s2" is displayed.
-
If the value is -8.9725 m/s2 or less, "-8.97250 m/s2" is displayed.
|
Throttle Opening Ratio
|
Throttle valve opening amount
|
0.0 to 100.0%
|
"Invalid" is displayed for non-gasoline vehicles.
|
Command Value of Fuel Injection Amount
|
Commanded fuel injection volume
|
0.0 to 120.0 mm3/st
|
-
"Invalid" is displayed for non-diesel vehicles.
-
If the value is 120 mm3/st or more, "120.0 mm3/st" is displayed.
|
Steering Signal
|
Steering angle
|
-567.0 to 567.0 deg
|
-
A positive value is displayed when the steering wheel is turned left.
-
If the value is 567 deg or more, "567.0 deg" is displayed.
-
If the value is -567 deg or less, "-567.0 deg" is displayed.
-
As the steering wheel must be turned for the steering angle sensor to obtain an initial value, if the steering wheel is not operated after the power switch is turned on (IG), an invalid value will be displayed.
|
HV Recognition Flag
|
Hybrid vehicle judgment
|
HV: Hybrid vehicle
Not HV: Gasoline vehicle or diesel vehicle
|
-
|
Diesel Flag
|
Diesel vehicle judgment
|
Diesel: Diesel vehicle
Not Diesel: Gasoline vehicle or hybrid vehicle
|
-
|
Sensor Type Identification (Security)
|
Existence of tilt sensor
|
With / Without
|
A fixed value is displayed for each vehicle.
|
Sensor Type Identification (G Sensor Layout)
|
Acceleration sensor installation angle in relation to longitudinal axis of vehicle
|
45 deg / 90 deg
|
A fixed value is displayed for each vehicle.
|
Sensor Type Identification (G Sensor)
|
Number of installed acceleration sensors
|
1 / 2
|
A fixed value is displayed for each vehicle.
|
Sensor Type Identification (Yaw Rate Sensor)
|
Number of installed yaw rate sensors
|
1 / 2
|
A fixed value is displayed for each vehicle.
|
Yaw G Sensor Installation Information
|
Acceleration sensor installation orientation (Normal or Reverse (180° from Normal))
|
Original / Counter
|
A fixed value is displayed for each vehicle.
|
Shift Gear
|
Selected gear (or range) displayed on meter when shift lever in M (or S)
|
OFF: Not displayed on meter
1st to 10th: Gear/range displayed on meter
|
The gear displayed may differ from the actual selected gear.
|
Power Train Mode
|
Current driving mode
|
Normal / Power / Eco
|
-
|
SNOW Mode
|
SNOW mode indicator status
|
ON: SNOW mode indicator illuminated
OFF: SNOW mode indicator not illuminated
|
If the value of "Valid/Invalid of Driving Mode" is "Invalid", this item will be invalid.
|
Valid/Invalid of Driving Mode
|
Validity of SNOW mode information
|
Valid / Invalid
|
-
|
VSC OFF Lamp
|
VSC OFF indicator status
|
ON: VSC OFF indicator illuminated
OFF: VSC OFF indicator not illuminated
|
If the value of "Valid/Invalid of TRC/VSC OFF Lamp" is "Invalid", this item will be invalid.
|
TRC OFF Lamp
|
TRC OFF indicator status
|
ON: TRC OFF indicator illuminated
OFF: TRC OFF indicator not illuminated
|
If the value of "Valid/Invalid of TRC/VSC OFF Lamp" is "Invalid", this item will be invalid.
|
Valid/Invalid of TRC/VSC OFF Lamp
|
Validity of TRC OFF indicator and VSC OFF indicator information
|
Valid / Invalid
|
-
|
EV Mode
|
EV mode indicator status
|
ON: EV MODE indicator illuminated
OFF: EV MODE indicator not illuminated
|
If the value of "Valid/Invalid of EV Mode" is "Invalid", this item will be invalid.
|
Valid/Invalid of EV Mode
|
Validity of EV mode information
|
Valid / Invalid
|
-
|
Drive Mode Select Signal
|
Indicates the currently selected drive mode
|
NORMAL / POWER / SPORT(3MODE) / SPORT(4MODE) / SPORT+ / COMFORT / ECO / Drive Mode Select customizing
|
If the value of "Valid/Invalid of Driving Mode" is "Invalid", this item will be invalid.
|
Engine Load Factor
|
Engine load
|
0.0 to 100.0%
|
"Invalid" is displayed for hybrid vehicles and diesel vehicles.
|
READY Signal
|
Driving possible
|
ON: Driving possible message displayed
OFF: Driving possible message not displayed
|
"Invalid" is displayed for gasoline vehicles and diesel vehicles.
|
Gear Position Signal
|
Current gear
|
1st / 2nd / 3rd / 4th / 5th / 6th / 7th / 8th / 9th / 10th
|
-
"Invalid" is displayed for hybrid vehicles.
-
"1" is always displayed for vehicles with a CVT.
|
Turbine RPM/Input Shaft RPM
|
Torque converter output shaft speed (transmission input shaft speed)
|
0 to 12650 rpm
|
-
|
Under DSC Control
|
Operation of DSC (Drive Start Control)
|
ON (Drive): DSC control is performed when shift lever is moved from P to R, D to R, or N to R
ON (Reverse): DSC control is performed when shift lever is moved from P to D or R to D
OFF: DSC is not operating
|
-
|
Under BOS Control
|
Operation of BOS (Brake Override System)
|
ON: Operating
OFF: Not operating
|
-
|
Under SCB Control
|
Operation of SCB
|
ON: Operating
OFF: Not operating
|
-
|
Under VSC Control
|
Operation of VSC
|
ON: Operating
OFF: Not operating or not equipped
|
-
|
Under ABS Control
|
Operation of ABS
|
ON: Operating
OFF: Not operating or not equipped
|
-
|
Under VDM Control
|
Operation of VDIM
|
ON: Operating
OFF: Not operating or not equipped
|
-
|
Under TRC Operation Flag
|
Operation of TRC
|
ON: Operating
OFF: Not operating or not equipped
|
-
|
FR Wheel Speed
|
Front right wheel speed
|
-327.68 to 327.65 km/h
|
If the value is 327.65 km/h or more, "327.65 km" is displayed.
|
FL Wheel Speed
|
Front left wheel speed
|
-327.68 to 327.66 km/h
|
If the value is 327.65 km/h or more, "327.65 km" is displayed.
|
RR Wheel Speed
|
Rear right wheel speed
|
-327.68 to 327.66 km/h
|
If the value is 327.65 km/h or more, "327.65 km" is displayed.
|
RL Wheel Speed
|
Rear left wheel speed
|
-327.68 to 327.66 km/h
|
If the value is 327.65 km/h or more, "327.65 km" is displayed.
|
Cruise System
|
Malfunction of cruise control system
|
Normal / Fault
|
-
|
Driving Force Demand Judgment Flag
|
Driving force demand
|
Driving Force / Non-Driving Force
|
A fixed value is displayed for each vehicle.
|
Cruise Control Master Switch Flag
|
Master control which determines vehicle speed while cruise control operating (powertrain/DSS (Driving Support System))
|
Power Train / DSS
|
-
If the value of "Cruise System" is "Fault", this item will be invalid.
-
A fixed value is displayed for each vehicle.
|
DSS Judgment Flag
|
Existence of DSS (Driving Support System)
|
Yes / No
|
If the value of "Cruise System" is "Fault", this item will be invalid.
|
Cruise Control Res/Accel SW
|
Cruise control RES/+ (ACCEL) switch status
|
ON / OFF
|
If the value of "Cruise System" is "Fault", this item will be invalid.
|
Cruise Control Set/Coast SW
|
Cruise control SET/- (COAST) switch status
|
ON / OFF
|
If the value of "Cruise System" is "Fault", this item will be invalid.
|
Cruise Control Cancel SW
|
Cruise control CANCEL switch status
|
ON / OFF
|
If the value of "Cruise System" is "Fault", this item will be invalid.
|
Cruise Control Brake SW
|
Stop light switch status while cruise control operating
|
ON / OFF
|
If the value of "Cruise System" is "Fault", this item will be invalid.
|
Cruise Control D Signal
|
Shift lever in D while cruise control operating
|
ON / OFF
|
If the value of "Cruise System" is "Fault", this item will be invalid.
|
Cruise Control Main SW
|
Cruise control main switch status
|
ON / OFF
|
If the value of "Cruise System" is "Fault", this item will be invalid.
|
Cruise Control Set Speed
|
Set vehicle speed for cruise control
|
0 to 255 km/h
|
If the value of "Cruise System" is "Fault", this item will be invalid.
|
Vehicle Speed (during Cruise Control)
|
Vehicle speed while cruise control operating
|
0 to 255 km/h
|
If the value of "Cruise System" is "Fault", this item will be invalid.
|
Cruise Control Request Value
|
Cruise control system requested throttle valve opening angle (when value of "Driving Force Demand Judgment Flag" is "Non-Driving Force") or driving force (when value of "Driving Force Demand Judgment Flag" is "Driving Force")
|
Throttle Valve Opening Angle: 0.0 to 127.5%
Driving Force: -12800 to 12700 N
|
-
The displayed values for this item and "Driving Force Demand Judgment Flag" will differ.
-
If the value of "Cruise System" is "Fault", this item will be invalid.
|
ACC Target Distance
|
Distance to target preceding vehicle while in ACC (Dynamic Radar Cruise Control) vehicle-to-vehicle distance control mode
|
0 to 251 m
|
If the value of "Cruise System" is "Fault", this item will be invalid.
|
ACC Target Condition
|
ACC (Dynamic Radar Cruise Control) system control status
|
Forward Vehicle / No Forward Vehicle / Constant Speed Mode / Radar Failure
|
If the value of "Cruise System" is "Fault", this item will be invalid.
|
ACC Relative Speed
|
Relative speed of target preceding vehicle while in ACC (Dynamic Radar Cruise Control) vehicle to vehicle distance control mode
|
-128 to 127 km/h
|
-
A negative value will be displayed when approaching the target preceding vehicle.
-
If the value of "Cruise System" is "Fault", this item will be invalid.
|
PCS Reception Data Invalid Flag
|
Validity of PCS related data
|
Valid / Invalid
|
-
|
ALM Request Flag
|
PCS warning operation command 1
|
ON / OFF
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
ALM Request Flag 2
|
PCS warning operation command 2
|
ON / OFF
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
ABK Request Flag
|
Brake request warning command
|
ON / OFF
|
-
Only displayed for vehicles with a driver monitor camera.
-
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PBA Request Flag
|
PCS brake assist command
|
OFF / PBA1 ON / PBA2 ON / PBA3 ON
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
FPB Request Flag
|
PCS brake (preliminary braking) command
|
ON / OFF
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PB Request Flag
|
PCS brake (operation) command
|
ON / OFF
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PSB Request Flag
|
PCS seat belt operation command
|
ON / OFF
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Prefill Request Flag
|
PCS brake (standby) command
|
ON / OFF
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Stop Lamp Lighting Request Flag
|
Stop light illumination command
|
ON / OFF
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS Brake Hold Request Flag
|
PCS after operation brake hold command
|
ON / OFF
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Collision Avoidance Assist Request Flag 1
|
Evasion support command 1
|
ON / OFF
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Collision Avoidance Assist Request Flag 2
|
Evasion support command 2
|
ON / OFF
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Collision Avoidance Assist Request Flag 3
|
Evasion support command 3
|
ON / OFF
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS SW
|
ON/OFF state of PCS according to switch operation
|
ON / OFF
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS Display (Diag Condition)
|
PCS system warning message status
|
ON / OFF
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS Display (Milli Wave Dirt)
|
Existence of dirt, etc. on millimeter wave radar sensor
|
ON / OFF
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS Display (Temporarily not available)
|
PCS temporarily disabled
|
System Available / System Not Available
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS Display (Sensor Recognition Status)
|
Sensor recognition status
|
Status1 / Status2
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS Display (Milli-Meter Wave Radar Low Voltage Status)
|
Millimeter wave radar sensor low voltage
|
Normal / Low
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS Display (Camera Backlight Status)
|
Existence of camera backlight
|
Normal / Backlight
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS Display (Milli-Meter Wave Radar Alignment Flag)
|
Millimeter wave radar sensor beam axis adjustment status
|
ON / OFF
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS Display (Object Recognition Status)
|
Target recognition status
|
Status1 / Status2
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS Display (Control Status 1)
|
PCS control status 1
|
Level1 / Level2 / Level3 / Level4
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS Display (Control Status 2)
|
PCS control status 2
|
Level1 / Level2 / Level3 / Level4
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Target Distance
|
Distance to PCS control target object
|
0.00 to 100.33 m
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Target Relative Velocity
|
Relative speed of PCS control target object
|
-57.540 to 14.000 m/s
|
-
A negative value will be displayed when approaching the target object.
-
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Target Lateral Position
|
Horizontal position of PCS control target object
|
-5.12 to 4.80 m
|
-
A positive value is displayed when the detected object is to the right of the vehicle centerline.
-
A negative value is displayed when the detected object is to the left of the vehicle centerline.
-
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Target Object Number
|
Target object type number of objects judged to be PCS control target objects
|
1 to 33
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Relative Acceleration for Control Target
|
Relative acceleration of PCS control target object
|
-8 to 7 m/s2
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Predicted Time to Collision 1 for Control Target
|
Estimated time until collision with PCS control target object 1
|
0.0 to 6.3 sec
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Predicted Time to Collision 2 for Control Target
|
Estimated time until collision with PCS control target object 2
|
0.0 to 6.3 sec
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Predicted Time to Collision Status for Control Target
|
Estimated time until collision with PCS control target object status
|
Status1 / Status2
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Sensor Recognition Status for Control Target
|
Sensor recognition status
|
Status1 to Status10
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Type of the Object for Control Target
|
PCS control target object type
|
Type1 to Type12
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS ALM Mode Status
|
PCS warning sensitivity setting
|
OFF / Far / Middle / Near
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS ALM Status
|
PCS warning status
|
Status1 to Status3
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS Guard Status A
|
PCS guard status A
|
Status1 to Status4
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS Guard Status B
|
PCS guard status B
|
Status1 / Status2
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
PCS Guard Status C
|
PCS guard status C
|
Status1 / Status2
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Sensor Recognition Status (Vertical Axis Offset Status of Milli-Meter Wave Radar)
|
Millimeter wave radar sensor vertical deviation
|
Status1 to Status8
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Sensor Recognition Status (Horizontal Axis Offset Status of Milli-Meter Wave Radar)
|
Millimeter wave radar sensor horizontal deviation
|
Status1 / Status2
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Estimated Curve Radius
|
Estimated route curve radius
|
-6400 to 6200 m
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Over Constant Longitudinal G Sensor Signal Value Detection
|
Displays whether the front and rear acceleration sensor signal value is at the specified value
|
OFF: The front and rear acceleration sensor signal value is at specified value or lower
ON: The front and rear acceleration sensor signal value is at specified value or higher
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Over Constant Lateral G Sensor Signal Value Detection
|
Displays whether the right and left acceleration sensor signal value is at specified value
|
OFF: The right and left acceleration sensor signal value is at specified value or lower
ON: The right and left acceleration sensor signal value is at specified value or higher
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
Over Constant RR or RA Value Detection
|
Displays whether the roll rate and roll angle is at the specified value
|
OFF: The roll rate and roll angle is at specified value or lower
ON: The roll rate and roll angle is at specified value or higher
|
If the value of "PCS Reception Data Invalid Flag" is "Invalid", this item will be invalid.
|
ASP-PCS Reception Data Invalid Flag
|
Availability of pre-crash safety system (stereo camera type).
|
Valid / Invalid
|
-
|
PST Request Flag
|
Condition when it is judged that steering control intervention is possible in addition to brake control by the PCS system.
|
Status1 / Status2 / Status3 / Status4
|
-
|
CAU Request Flag
|
Warning function request status.
|
Status1 / Status2 / Status3 / Status4
|
-
|
Kind of PCS System
|
The type of PCS control being performed.
|
Status1 / Status2 / Status3 / Status4 / Status5 / Status6 / Status7 / Status8
|
-
|
Outside Lane Status
|
Whether the vehicle is traveling within its lane.
|
Status1 / Status2
|
-
|
SCS Steering Angle
|
The angle (rad) of the steering request sent to the EPS when the system performs steering assist.
|
-32.768 to 32.512 rad
|
-
|
Camera Load Face Detection
|
Whether objects on the road surface are recognized by the stereo camera.
|
Status1 / Status2
|
-
|
Side Radar Target Object Number
|
The target number detected by the front radar.
|
0 to 31
|
-
|
CAU Operation Pattern
|
Function that notifies the driver via a warning (wedge display from left and right, beam display to target object) on the HUD when vehicles are approaching at an intersection.
|
0 to 15
|
-
|
PCS Status2
|
The front radar status.
|
0 to 7
|
-
|
Predicted Time to Collision for Side Radar Control Target
|
Time until collision with target detected by front radar control.
|
0 to 6.3 sec
|
-
|
Type of the Object for Side Radar Control Target
|
The type of target object detected by front radar control (target size).
|
Type1 / Type2 / Type3 / Type4
|
-
|
Estimated Cross Time for Side Radar Control Target
|
The time until the target passes in front of the vehicle.
|
0 to 6.3 sec
|
-
|
Caution SW
|
The warning function on/off status.
When the warning function OFF switch is pressed, it turns off.
|
OFF / ON
|
-
|
Side Radar Target Relative Velocity X
|
The relative longitudinal speed with regard to the target of front control.
|
-51.2 to 50.4 m/s
|
-
|
Caution Display
|
Whether the headup display is displaying.
|
OFF / ON
|
-
|
Side Radar Target Relative Velocity Y
|
The relative lateral speed with regard to the target of front control.
|
-51.2 to 50.4 m/s
|
-
|
Side Radar Target Distance X
|
The relative distance with regard to the target of front control.
|
-64 to 140 m
|
-
|
Side Radar Target Distance Y
|
The relative distance with regard to the target of front control.
|
-64 to 140 m
|
-
|
Collision Point
|
The predicted position where target will collide with vehicle.
|
0 to 24
|
-
|
SDV Request Flag
|
The result judged by the PCS function so that the airbag deploys at an appropriate time.
|
Status1 / Status2 / Status3 / Status4
|
-
|
PST Target Lateral Position
|
The target side position judged by the steering assist PCS function.
|
-12.8 to 12.7 m
|
-
|
PST Target Distance
|
The target distance judged by the steering assist PCS function.
|
0 to 127.5 m
|
-
|
PST Target Collision Lateral Position
|
The target side collision position judged by the steering assist PCS function.
|
-4 to 3.75 m
|
-
|
Rear Side Object Status
|
The rear radar rear target detection status.
|
Status1 / Status2 / Status3 / Status4
|
-
|
PST ETTC
|
Changes the specification to represent the target ETTC judged by the steering assist PCS function instead of the TTB (Time to brake).
|
0 to 12.7 sec
|
-
|
PST Obstacle Status
|
The angle judged by the steering assist PCS function.
|
-32 to 31 deg
|
-
|
Time to Lane Crossing
|
The time until collision with the white lines to the left and right of the currently traveled lane while driving.
|
0 to 25.5 sec
|
-
|
Pedestrian Protection System Record Trigger Signal
|
Displays the pressure sensor output condition
|
Trigger is not established / Judgment Error of trigger / Trigger is established
|
-
|
Pedestrian Protection System Maximum Pressure Ratio (LH)
|
Displays the maximum pressure change rate for the left side pressure sensor
|
-5 to 26.75 %
|
-
|
Pedestrian Protection System Maximum Pressure Ratio (RH)
|
Displays the maximum pressure change rate for the right side pressure sensor
|
-5 to 26.75 %
|
-
|
Pedestrian Protection System Vehicle Speed for Calculation
|
Displays the front bumper speed (calculated value)
|
0 to 254 km/h
|
-
|
Rear Pop-Up Hood ECU Judgment Status
|
Displays whether the rear pop up hood has been operated
|
Rear Pop-Up Hood deployment judgment is not established / Judgment Error of Pedestrian Detection System / Rear Pop-Up Hood deployment judgment is established
|
-
|
Front Pop-Up Hood ECU Judgment Status
|
Displays whether the front pop up hood has been operated
|
Front Pop-Up Hood deployment judgment is not established / Judgment Error of Pedestrian Detection System / There is no setting of Front Pop-Up Hood / Front Pop-Up Hood deployment judgment is established
|
-
|
Pedestrian Protection Airbag ECU Judgment Status
|
Displays whether the pedestrian airbag has been operated
|
Pedestrian airbag deployment judgment is not established / Judgment Error of Pedestrian Detection System / There is no setting of Pedestrian airbag / Pedestrian airbag deployment judgment is established
|
-
|
LKA DDR Trigger Signal
|
Detection of LKA/LDA trigger (Trigger ID No. 19)
|
Trigger OFF: Conditions not met
Trigger Condition1: Condition 1 met
Trigger Condition2: Condition 2 met
Trigger Condition3: Condition 3 met
|
If the value of "Invalid of LKA DDR Data" is "Invalid", this item will be invalid.
|
Invalid of LKA DDR Data
|
Validity of LKA/LDA related information
|
Valid / Invalid
|
-
|
Steering Wheel Release Condition
|
Driver hands on steering wheel judgment during LKA operation
|
ON: Hands not detected on steering wheel
OFF: Hands detected on steering wheel
|
If the value of "Invalid of LKA DDR Data" is "Invalid", this item will be invalid.
|
Steering Operation of LKA
|
Steering wheel operation judgment during LKA operation
|
ON: Steering wheel being operated
OFF: Steering wheel not being operated
|
If the value of "Invalid of LKA DDR Data" is "Invalid", this item will be invalid.
|
Steering Operation of LDA
|
Steering wheel operation judgment during LDA operation
|
ON: Steering wheel being operated
OFF: Steering wheel not being operated
|
If the value of "Invalid of LKA DDR Data" is "Invalid", this item will be invalid.
|
LKA Control Condition (EPS Control)
|
EPS control status
|
ON: EPS control operating
OFF: EPS control not operating
|
If the value of "Invalid of LKA DDR Data" is "Invalid", this item will be invalid.
|
LKA Control Condition
|
LKA/LDA control status
|
LKA Available: LKA operation possible
LDA Available: LDA operation possible
OFF: LKA/LDA operation not possible
|
If the value of "Invalid of LKA DDR Data" is "Invalid", this item will be invalid.
|
Turn Signal Operation
|
Turn signal operation status
|
OFF / Right Turn ON / Left Turn ON
|
If the value of "Invalid of LKA DDR Data" is "Invalid", this item will be invalid.
|
EPS Torque Sensor Value
|
Amount of EPS assist
|
-12.5 to 12.5 Nm
|
A positive value is displayed when the steering wheel is turned left.
|
LTA Trigger Signal
|
The DDR trigger type.
|
Trigger OFF / Over Constant Steering Torque Detection / Over Constant Steering Angle Speed Detection / Over Constant Acceleration Detection
|
-
|
LTA DDR Reception Status
|
Valid / invalid status of LTA related data
|
Valid / Invalid
|
-
|
LTA Steering Wheel Hold Condition
|
Whether the driver has their hands on the steering wheel when using LTC.
|
Release / Hold Condition (Steering Touch Sensor) / Hold Condition (Torque Sensor) / Hold Condition (Steering Touch Sensor and Torque Sensor)
|
-
|
Steering Operation of LTA
|
Whether the driver is steering.
|
OFF / ON
|
-
|
LTA Control Condition
|
The existence of control requests to the power steering ECU or the LTA control operation status.
|
No Control / Control State No1 / Control State No2 / Control State No3
|
-
|
LTA EPS Pinion Angle
|
The steering wheel angle information used for LTA control.
|
-32.767 to 32.766 rad
|
-
|
LTA Leading Vehicle Following
|
Driving while tracking a preceding vehicle.
|
OFF / ON
|
-
|
LTA Leading Vehicle Departure
|
The recognized preceding vehicle has gone away due to a lane change, etc.
Turns ON when the preceding vehicle approaches the white line, and turns OFF if the vehicle changes lanes.
|
OFF / ON
|
-
|
LCA Trigger Signal
|
DDR trigger status of LCA
|
OFF / ON
|
-
|
LCA Data Reception Status
|
Valid / invalid status of LCA related data
|
Valid / Invalid
|
-
|
LCA Steering Override Trigger
|
The system is overridden due to the steering wheel being turned.
|
OFF / ON
|
-
|
LCA Proximity Warning Trigger
|
The proximity warning for suddenly approaching vehicles near the vehicle.
|
OFF / ON
|
-
|
LCA Brake Override Trigger
|
The system is overridden due to sudden braking.
|
OFF / ON
|
-
|
LCA Distance of Adjacent Forward Vehicle
|
The distance to the preceding vehicle in the lane change destination.
|
0 to 75 m
|
-
|
LCA Relative Speed of Adjacent Forward Vehicle
|
The relative speed of the preceding vehicle in the lane change destination.
|
-16 to 14 m/s
|
-
|
LCA Distance of Adjacent Backward Vehicle
|
The distance to the rear vehicle in lane change destination.
|
0 to 75 m
|
-
|
LCA Relative Speed of Adjacent Backward Vehicle
|
The relative speed of the rear vehicle in the lane change destination.
|
-16 to 14 m/s
|
-
|
LCA Distance of Forward Vehicle
|
The distance from the preceding vehicle in the vehicle's lane in relation to the lane change control target.
|
0 to 75 m
|
-
|
LCA Relative Speed of Forward Vehicle
|
The relative speed of the preceding vehicle in the vehicle's lane in relation to the target of lane change control.
|
-16 to 14 m/s
|
-
|
LCA Control State
|
The lane change support state.
|
State0 / State1 / State2 / State3 / State4 / State5 / State6 / Invalid
|
-
|
LCA Judgment (RH)
|
The judgment result of a permission request to change lanes to the right.
|
Initial Value / NG
|
-
|
LCA Judgment (LH)
|
The judgment result of a permission request to change lanes to the left.
|
Initial Value / NG
|
-
|
Turn Signal State
|
Whether the turn signals are on.
|
Invalid / Left Turn Signal ON / Right Turn Signal ON / Non-operation
|
-
Left turn signal light operating → Left turn signal light is blinking.
-
Right turn signal light operating → Right turn signal light is blinking.
-
Not operating → Neither turn signal light is blinking.
|
LCA Left Lane Marker Kind
|
The type of lane markers to the left of the vehicle (solid, dotted or Botts' Dots).
|
Solid / Broken / Bott' Dots / Invalid
|
-
|
LCA Right Lane Marker Kind
|
The type of lane markers to the right of the vehicle (solid, dotted or Botts' Dots).
|
Solid / Broken / Bott' Dots / Invalid
|
-
|
LCA Left Lane Marker Position
|
The distance between the lane marker to the left of the vehicle and this vehicle.
The recorded value "0" indicates that the vehicle center is on the left lane marker.
|
-4.9 to 1.4 m
|
-
|
LCA Right Lane Marker Position
|
The distance between the lane marker to the right of the vehicle and this vehicle.
The recorded value "0" indicates that the vehicle center is on the right lane marker.
|
-1.5 to 4.8 m
|
-
|
LCA Yaw Angle
|
The LCA yaw angle.
|
-0.2784 to 0.2697 rad
|
-
|
LCA Curvature
|
The LCA lane curvature.
|
-0.01 to 0.0096875 1/m
|
-
|
ICS Received Data Invalid Flag
|
Existence of ICS related data
|
Valid / Invalid
|
-
|
ICS Trigger Flag
|
Existence of ICS trigger conditions (Trigger ID 20-1, 20-2, 20-3, 20-4, 20-5, 20-6)
|
OFF / Output Limit / Max Output Limit / Brake Control / Stop / Regression / Temporarily Not Available
|
-
If ICS has not operated, "OFF" is displayed.
-
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
|
ICS Temporarily Not Available (Low Voltage)
|
ICS temporarily disabled (sensor voltage)
|
Available / Not Available
|
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
|
ICS Temporarily Not Available (Dirt)
|
ICS temporarily disabled (dirt, etc. on sensor)
|
Available / Not Available
|
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
|
ICS Request Driving Force Control Flag
|
Driving force suppression control operation
|
ON / OFF
|
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
|
ICS Request Braking Control Flag
|
Braking control operation
|
ON / OFF
|
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
|
ICS Controlled Object Distance
|
Distance to detected object
|
0.00 to 3.78 m
|
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
|
ICS Controlled Object 1 Position (X)
|
X-axis position of detected object
|
0.00 to 3.78 m
|
-
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
-
Different values will be displayed for each detected object 1 to 3.
|
ICS Controlled Object 1 Position (Y)
|
Y-axis position of detected object
|
-3.84 to 3.72 m
|
-
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
-
Different values will be displayed for each detected object 1 to 3.
|
ICS Recognition Sensor (Controlled Object 1)
|
Position of sensor which detected object
|
W/O / Send LH Center to LH Corner / Send LH Center to RH Center / Send RH Center to RH Corner / Send RH Center to LH Center / Send LH Corner to LH Center / Send RH Corner to RH Center
|
-
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
-
Different values will be displayed for each detected object 1 to 3.
|
ICS Recognition Level (Controlled Object 1)
|
Length of time the object was detected (level)
|
Without Level / Level 1 / Level 2 / Level 3
|
-
The higher the level is, the longer the object was detected.
-
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
-
Different values will be displayed for each detected object 1 to 3.
|
ICS Controlled Object 2 Position (X)
|
X-axis position of detected object
|
0.00 to 3.78 m
|
-
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
-
Different values will be displayed for each detected object 1 to 3.
|
ICS Controlled Object 2 Position (Y)
|
Y-axis position of detected object
|
-3.84 to 3.72 m
|
-
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
-
Different values will be displayed for each detected object 1 to 3.
|
ICS Recognition Sensor (Controlled Object 2)
|
Position of sensor which detected object
|
W/O / Send LH Center to LH Corner / Send LH Center to RH Center / Send RH Center to RH Corner / Send RH Center to LH Center / Send LH Corner to LH Center / Send RH Corner to RH Center
|
-
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
-
Different values will be displayed for each detected object 1 to 3.
|
ICS Recognition Level (Controlled Object 2)
|
Length of time the object was detected (level)
|
Without Level / Level 1 / Level 2 / Level 3
|
-
The higher the level is, the longer the object was detected.
-
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
-
Different values will be displayed for each detected object 1 to 3.
|
ICS Controlled Object 3 Position (X)
|
X-axis position of detected object
|
0.00 to 3.78 m
|
-
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
-
Different values will be displayed for each detected object 1 to 3.
|
ICS Controlled Object 3 Position (Y)
|
Y-axis position of detected object
|
-3.84 to 3.72 m
|
-
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
-
Different values will be displayed for each detected object 1 to 3.
|
Operation Function
|
Displays the functions in operation
|
Without / ICS / RCTAB / ICS+RCTAB / Pedestrian ICS / ICS+Pedestrian ICS / RCTAB+Pedestrian ICS / ICS+RCTAB+Pedestrian ICS
|
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
|
ICS Recognition Level (Controlled Object 3)
|
Length of time the object was detected (level)
|
Without Level / Level 1 / Level 2 / Level 3
|
-
The higher the level is, the longer the object was detected.
-
If the value of "ICS Received Data Invalid Flag" is "Invalid", this item will be invalid.
-
Different values will be displayed for each detected object 1 to 3.
|
FHL Request Flag
|
The request signal to blink the hazard warning lights.
|
OFF / ON
|
-
|
FHL Status
|
The BSM sensor status. Notifies of whether the system is malfunctioning or operating normally.
|
Not Operation / Meter Valve Check / FHL Alarm ON and MID Display Request / Normal / Fault / Dirt
|
-
|
FHL1 Object Distance Y
|
The distance to the target of rear vehicle proximity warning 1 control.
|
-102.4 to 102.2 m
|
-
|
FHL1 Object Distance X
|
The distance to the target of rear vehicle proximity warning 1 control.
|
-102.4 to 102.2 m
|
-
|
FHL1 Relative Speed Y
|
The relative speed of the target of rear vehicle proximity warning 1 control.
|
-25.6 to 25.4 m/s
|
-
|
FHL1 Relative Speed X
|
The relative speed of the target of rear vehicle proximity warning 1 control.
|
-25.6 to 25.4 m/s
|
-
|
FHL1 RCS Level
|
The intensity of reflections from the target. Vehicles have a strong intensity while bicycles, etc., have a weak intensity. A higher level means a stronger intensity.
|
0 to 7
|
-
|
FHL1 TTC
|
The time until collision with the target detected by rear vehicle proximity warning 1 control.
|
0 to 3.1 sec
|
-
|
FHL1 (New Target Flag)
|
Whether a new visible object is present.
|
OFF / ON
|
-
|
FHL1 (Detecting Radar)
|
Whether the object is detected by the left or right radar.
|
Right / Left
|
-
|
FHL1 (Operating Trigger Flag)
|
Whether the system is operating.
|
OFF / ON
|
-
|
FHL1 (Ghosting Flag)
|
Whether the target was detected reliably.
|
OFF / ON
|
-
|
FHL1 (Extrapolating Flag)
|
Whether extrapolation has occurred.
|
OFF / ON
|
-
|
FHL1 (Radar Blockage Ratio Flag)
|
The radar blockage on/off status.
|
OFF / ON
|
-
|
FHL1 (Radar Distortional Flag)
|
Whether extrapolation has occurred.
|
OFF / ON
|
-
|
FHL1 (Adjacent Reflection Flag)
|
Whether reflective objects are near the vehicle.
|
OFF / ON
|
-
|
FHL1 (CAN Received Data)
|
The CAN reception data valid/invalid status.
The status is invalid when CAN data cannot be received, etc.
|
Valid / Invalid
|
-
|
FHL1 ID
|
IDs 1, 2 and 3 are assigned in descending order of priority for rear vehicle proximity warning operation targets.
|
0 to 3
|
-
|
FHL2 Object Distance Y
|
The distance to the target of rear vehicle proximity warning 2 control.
|
-102.4 to 102.2 m
|
-
|
FHL2 Object Distance X
|
The distance to the target of rear vehicle proximity warning 2 control.
|
-102.4 to 102.2 m
|
-
|
FHL2 Relative Speed Y
|
The relative speed of the target of rear vehicle proximity warning 2 control.
|
-25.6 to 25.4 m/s
|
-
|
FHL2 Relative Speed X
|
The relative speed of the target of rear vehicle proximity warning 2 control.
|
-25.6 to 25.4 m/s
|
-
|
FHL2 RCS Level
|
The intensity of reflections from the target. Vehicles have a strong intensity while bicycles, etc., have a weak intensity. A higher level means a stronger intensity.
|
0 to 7
|
-
|
FHL2 TTC
|
The time until collision with the target detected by rear vehicle proximity warning 2 control.
|
0 to 3.1 sec
|
-
|
FHL2 (New Target Flag)
|
Whether a new visible object is present.
|
OFF / ON
|
-
|
FHL2 (Detecting Radar)
|
Whether the object is detected by the left or right radar.
|
Right / Left
|
-
|
FHL2 (Operating Trigger Flag)
|
Whether the system is operating.
|
OFF / ON
|
-
|
FHL2 (Ghosting Flag)
|
Whether the target was detected reliably.
|
OFF / ON
|
-
|
FHL2 (Extrapolating Flag)
|
Whether extrapolation has occurred.
|
OFF / ON
|
-
|
FHL2 (Radar Blockage Ratio Flag)
|
The radar blockage on/off status.
|
OFF / ON
|
-
|
FHL2 (Radar Distortional Flag)
|
Whether extrapolation has occurred.
|
OFF / ON
|
-
|
FHL2 (Adjacent Reflection Flag)
|
Whether reflective objects are near the vehicle.
|
OFF / ON
|
-
|
FHL2 (CAN Received Data)
|
The CAN reception data valid/invalid status.
The status is invalid when CAN data cannot be received, etc.
|
Valid / Invalid
|
-
|
FHL2 ID
|
IDs 1, 2 and 3 are assigned in descending order of priority for rear vehicle proximity warning operation targets.
|
0 to 3
|
-
|
FHL3 Object Distance Y
|
The distance to the target of rear vehicle proximity warning 3 control.
|
-102.4 to 102.2 m
|
-
|
FHL3 Object Distance X
|
The distance to the target of rear vehicle proximity warning 3 control.
|
-102.4 to 102.2 m
|
-
|
FHL3 Relative Speed Y
|
The relative speed of the target of rear vehicle proximity warning 3 control.
|
-25.6 to 25.4 m/s
|
-
|
FHL3 Relative Speed X
|
The relative speed of the target of rear vehicle proximity warning 3 control.
|
-25.6 to 25.4 m/s
|
-
|
FHL3 RCS Level
|
The intensity of reflections from the target. Vehicles have a strong intensity while bicycles, etc., have a weak intensity. A higher level means a stronger intensity.
|
0 to 7
|
-
|
FHL3 TTC
|
The time until collision with the target detected by rear vehicle proximity warning 3 control.
|
0 to 3.1 sec
|
-
|
FHL3 (New Target Flag)
|
Whether a new visible object is present.
|
OFF / ON
|
-
|
FHL3 (Detecting Radar)
|
Whether the object is detected by the left or right radar.
|
Right / Left
|
-
|
FHL3 (Operating Trigger Flag)
|
Whether the system is operating.
|
OFF / ON
|
-
|
FHL3 (Ghosting Flag)
|
Whether the target was detected reliably.
|
OFF / ON
|
-
|
FHL3 (Extrapolating Flag)
|
Whether extrapolation has occurred.
|
OFF / ON
|
-
|
FHL3 (Radar Blockage Ratio Flag)
|
The radar blockage on/off status.
|
OFF / ON
|
-
|
FHL3 (Radar Distortional Flag)
|
Whether extrapolation has occurred.
|
OFF / ON
|
-
|
FHL3 (Adjacent Reflection Flag)
|
Whether reflective objects are near the vehicle.
|
OFF / ON
|
-
|
FHL3 (CAN Received Data)
|
The CAN reception data valid/invalid status.
The status is invalid when CAN data cannot be received, etc.
|
Valid / Invalid
|
-
|
FHL3 ID
|
IDs 1, 2 and 3 are assigned in descending order of priority for rear vehicle proximity warning operation targets.
|
0 to 3
|
-
|
Stop Assist Invalid Flag
|
Whether the stop assist function is enabled.
|
Valid / Invalid
|
-
|
Stop Assist Steering Wheel Release Condition
|
Whether 5 seconds or more have elapsed since the steering wheel was released during LTC control.
|
OFF / ON
|
-
|
Stop Assist Horn Request
|
Whether a horn buzzer request is sent.
|
OFF / ON
|
-
|
Stop Assist Hazard Request
|
Whether a hazard warning light blinking request is sent.
|
OFF / ON
|
-
|
Stop Assist Helpnet Connection
|
Whether the system is connected to Helpnet.
|
Disconnect / Connect
|
-
|
Stop Assist Door Unlock Request
|
Whether a door unlock request is sent.
|
OFF / ON
|
-
|
Stop Assist System Phase
|
The phase status of the stop assist function.
|
Initial state / LTA ON / Steering wheel release warning / Phase 1 / Phase 2 / Phase 3 / Phase 4 / Assist end
|
Stop support system when driver abnormal: Described below in Stop Support
-
Initial state: LTA not performing control and stop support is not operating
-
LTA ON: LTA is performing control but stop support is not operating
-
Steering wheel release warning: LTA is performing control and a hand-off warning is issued, but stop support is not operating.
-
Phase 1: Warning 1 is issued after non-operation continues following hand-off warning (Warning issued via buzzer and display)
-
Phase 2: Warning 2 is issued after non-operation continues after phase 1 (Hazard lights blink after decelerating to a certain speed via gentle deceleration)
-
Phase 3: Deceleration/stop control is performed after non-operation continues after phase 2 (Deceleration control, proximity warning via horn and hazard lights)
-
Phase 4: Stop maintained when vehicle is stopped after phase 3. (Proximity warning via horn and hazard lights, HelpNet connected and doors unlocked)
-
Assist end: Control released at phase 4 for prohibited operations
|
Stop Assist Brake State
|
The brake status of the stop assist function.
|
No request / Control (Other) / Control (Stop Assist) / Hold mode / EPB lock / Brake fail / Communication error / logical check error
|
-
No request: No request to brakes
-
Control (Other): Brakes operated for other systems
-
Control (Stop Assist): Brakes operated for stop support
-
Hold mode: Stopped and held by hydraulic brakes
-
EPB lock: System transitions from oil pressure hold to EPB LOCK control.
-
Brake fail: Brakes abnormal
-
Communication error: Communication malfunction with brakes
-
logical check error: Abnormal request output to brake system
|
Stop Assist Speed Restraint Phase Counter
|
The number of transitions to phase 2.
|
0 / 1 / 2-5 / 6-10 / 11-20 / 21-50 / 51-100 / More than 100
|
-
|
Stop Assist Shift to Deceleration Phase
|
The flag that is enabled for a certain time after transitioning to phase 3.
A duration of time longer than 500 ms is set for the EDA DDR recording interval so that the DDR is recorded for a certain amount of time. (Example: 600 ms)
|
OFF / ON
|
-
|
Stop Assist Shift to Stop Phase
|
The flag that is enabled for a certain time after transitioning to phase 4.
A duration of time longer than 500 ms is set for the EDA DDR recording interval so that the DDR is recorded for a certain amount of time. (Example: 600 ms)
|
OFF / ON
|
-
|
Stop Assist User Cancel
|
How (what user operation) the stop assist function was canceled.
|
OFF / Operate LTC SW / Operate ACC SW / Operate accelerator pedal / Hands on steering wheel / Operate EPB SW / Operate brake pedal
|
OFF: No cancel operation by user
|
Stop Assist Automatic Cancel
|
Indicates which control operation resulted in the stop assist function control being automatically canceled.
|
OFF / ACC cancel / LTA cancel / Brake fail
|
OFF: No automatic cancel operation through control
|
Stop Assist Accelerator Pedal Angle
|
Pedal position after removing the high frequency through the moving average filter for the accelerator pedal position recorded by the stop assist function.
|
0 to 127 %
|
-
|
|