Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001G4GU
Model Year Start: 2020 Model: GR Corolla Prod Date Range: [01/2019 -           ]
Title: DOOR / HATCH: FUEL LID OPENER SWITCH: INSPECTION; 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 -        ]

INSPECTION

PROCEDURE

1. INSPECT FUEL LID OPENER SWITCH

(a) Check the switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

5 (IG) - 2 (E)

Pressed (On)

Below 1 Ω

5 (IG) - 2 (E)

Not pressed (Off)

10 kΩ or higher

If the result is not as specified, replace the fuel lid opener switch.

*a

Component without harness connected

(Fuel Lid Opener Switch)

(b) Check the switch illumination.

(1) Apply auxiliary battery voltage to the switch connector and check that the fuel lid opener switch illuminates.

OK:

Auxiliary Battery Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 6 (ILL+)

Auxiliary battery negative (-) → Terminal 1 (ILL-)

Illumination illuminates

If the result is not as specified, replace the fuel lid opener switch.