Last Modified: 01-27-2025 6.11:8.1.0 Doc ID: RM100000001G4GP
Model Year Start: 2020 Model: GR Corolla Prod Date Range: [01/2019 -           ]
Title: DOOR / HATCH: FUEL LID OPENER MOTOR ASSEMBLY: INSPECTION; 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 -        ]

INSPECTION

PROCEDURE

1. INSPECT FUEL LID LOCK WITH MOTOR ASSEMBLY

(a) Check the operation of the fuel lid lock with motor assembly (motor operation).

(1) Apply auxiliary battery voltage to the fuel lid lock with motor assembly connector, and check the operation of the fuel lid lock with motor assembly.

Standard:

Auxiliary Battery Connection

Specified Condition

Auxiliary battery positive (+) → Terminal 1 (B)

Auxiliary battery negative (-) → Terminal 2 (E)

16.05 mm

(0.632 in.)

If the result is not as specified, replace the fuel lid lock with motor assembly.

*a

Component without harness connected

(Fuel Lid Lock with Motor Assembly)

*b

Shaft Stroke

*c

Lever

*d

Shaft

(b) Check the operation of the fuel lid lock with motor assembly (fuel lid courtesy switch).

(1) Measure the resistance according the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

2 (E) - 3 (B)

Shaft not pushed (ON)

Below 1 Ω

2 (E) - 3 (B)

Shaft pushed (OFF)

10 kΩ or higher

If the result is not as specified, replace the fuel lid lock with motor assembly.

(c) Measure the shaft stroke.

Standard:

Area

Condition

Specified Condition

Shaft stroke

Lever pulled

16.05 mm

(0.632 in.)

If the result is not as specified, replace the fuel lid lock with motor assembly.