| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001G46O |
| Model Year Start: 2020 | Model: Corolla | Prod Date Range: [01/2019 - 11/2022] |
| Title: MAINTENANCE: 2ZR-FAE DRIVE BELT: INSTALLATION; 2020 - 2023 MY Corolla [01/2019 - 11/2022] | ||
INSTALLATION
PROCEDURE
1. INSTALL V-RIBBED BELT
|
(a) Set the V-ribbed belt onto every pulley. |
|
(b) Attach a wrench to the hexagonal portion (A) or (B) of the V-ribbed belt tensioner assembly as shown in the illustration, and while rotating the V-ribbed belt tensioner assembly clockwise, remove the 5 mm hexagon wrench.
NOTICE:
Check that the V-ribbed belt is properly set to each pulley.
2. INSPECT V-RIBBED BELT
Click here
![2020 - 2023 MY Corolla [01/2019 - 11/2022]; 2ZR-FAE (ENGINE MECHANICAL): DRIVE BELT: ON-VEHICLE INSPECTION+](/t3Portal/stylegraphics/info.gif)
3. INSTALL REAR ENGINE UNDER COVER RH
(a) Type A:
(1) Install the rear engine under cover RH to the vehicle with the screw and 7 clips.
(b) Type B:
(1) Install the rear engine under cover RH to the vehicle with the screw and 8 clips.
|
|