2ZR-FAE (ENGINE MECHANICAL): FRONT CRANKSHAFT OIL SEAL: INSTALLATION; 2020 - 2023 MY Corolla [01/2019

Last Modified: 01-27-2025	6.11:8.1.0	Doc ID: RM100000001G45E
Model Year Start: 2020	Model: Corolla	Prod Date Range: [01/2019 - 11/2022]
Title: 2ZR-FAE (ENGINE MECHANICAL): FRONT CRANKSHAFT OIL SEAL: INSTALLATION; 2020 - 2023 MY Corolla [01/2019 - 11/2022]

INSTALLATION

1. INSTALL TIMING CHAIN COVER OIL SEAL

(a) Apply MP grease to the lip of a new timing chain cover oil seal.

NOTICE:

Keep the lip free from foreign matter.

(b) Using SST and a hammer, tap in the timing chain cover oil seal until its surface is flush with the timing chain cover sub-assembly edge.

SST: 09223-22010

Timing Chain Oil Seal Tap in Depth:

-1.0 to 1.0 mm (-0.0394 to 0.0394 in.)

NOTICE:

*a	Tap in Depth

2. INSTALL CRANKSHAFT PULLEY

(a) Align the crankshaft timing gear key with the crankshaft pulley set key groove of the crankshaft pulley.

(b) Using SST, hold the crankshaft pulley in place and tighten the crankshaft pulley set bolt.

SST: 09213-54015

91551-00850

SST: 09330-00021

Torque:

190 N·m {1937 kgf·cm, 140 ft·lbf}

*a	Turn
*b	Hold

3. INSTALL V-RIBBED BELT

Click here

4. INSPECT V-RIBBED BELT

Click here

5. INSTALL REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY RH

Click here

6. INSPECT FOR OIL LEAK

Click here

7. INSTALL REAR ENGINE UNDER COVER RH

Click here

8. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Click here

9. INSTALL FRONT WHEEL RH

Click here