Last Modified: 07-31-2024 6.11:8.1.0 Doc ID: RM100000001G454
Model Year Start: 2020 Model: Corolla Prod Date Range: [01/2019 - 11/2022]
Title: 2ZR-FAE (ENGINE MECHANICAL): DRIVE BELT: ON-VEHICLE INSPECTION; 2020 - 2023 MY Corolla [01/2019 - 11/2022]

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT V-RIBBED BELT

(a) Check the V-ribbed belt for wear, cracks or other signs of damage.

HINT:

If any of the following defects is found, replace the V-ribbed belt.

  • The V-ribbed belt is cracked.
  • The V-ribbed belt is worn out to the extent that the cords are exposed.
  • The V-ribbed belt has chunks missing from the ribs.

(b) Check that the V-ribbed belt fits properly in the ribbed grooves.

HINT:

Check with your hand to confirm that the V-ribbed belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the V-ribbed belt. Install a new V-ribbed belt correctly.

*a

Correct

*b

Incorrect