Last Modified: 07-31-2024 |
6.11:8.1.0 |
Doc ID: RM100000001D1NG |
Model Year Start: 2019 |
Model: GR Corolla |
Prod Date Range: [06/2018 - 03/2019] |
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ECU: REMOVAL; 2019 - 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 03/2019] |
REMOVAL
PROCEDURE
1. PRECAUTION
NOTICE:
-
When replacing the radio and display receiver assembly or navigation ECU, always replace it with a new one. If a radio and display receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:
-
A communication malfunction DTC may be stored.
-
The radio and display receiver assembly or navigation ECU may not operate normally.
-
After replacing the navigation ECU, if "New software is not compatible with the system. Contact your dealer." is displayed on the multi-display, update the software of the radio and display receiver assembly.
-
When performing the following work, the navigation system may restart when turning the engine switch on (ACC) (due to radio and display receiver assembly and navigation ECU certification).
-
Repair or replace the negative (-) battery terminal due to it being disconnected or depleted.
-
The radio and display receiver assembly or navigation ECU replacement or removal and installation.
NOTICE:
Click here
2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
3. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Click here
4. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
Click here
5. REMOVE NAVIGATION ECU COVER
(a) Disengage the 2 claws and remove the navigation ECU cover as shown in the illustration.
|
Remove in this Direction
|
6. REMOVE NAVIGATION ECU WITH BRACKET
(a) Remove the 3 bolts and disengage the 3 guides.
|
|
(b) Disconnect each connector and remove the navigation ECU with bracket.
7. REMOVE NO. 1 MULTI-MEDIA MODULE BRACKET
(a) Remove the 2 screws and No. 1 multi-media module bracket.
|
|
8. REMOVE NO. 2 MULTI-MEDIA MODULE BRACKET
(a) Remove the 2 screws and No. 2 multi-media module bracket.
|
|
9. REMOVE NAVIGATION ECU
|