| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001D1LP |
| Model Year Start: 2019 | Model: GR Corolla | Prod Date Range: [06/2018 - 01/2019] |
| Title: CELLULAR COMMUNICATION: BACK-UP BATTERY: REMOVAL; 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during back-up battery removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function When Necessary Procedures are not Performed |
Link |
|---|---|---|---|
|
back-up battery |
Perform the reset back-up battery condition |
Safety Connect System |
|
PROCEDURE
1. REMOVE DCM (TELEMATICS TRANSCEIVER)
Click here
![2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]; CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE BACK-UP BATTERY
(a) Disengage the 2 claws and remove the transceiver cover as shown in the illustration.
|
Remove in this Direction |
(b) Disconnect the connector and remove the back-up battery as shown in the illustration.
|
|
Remove in this Direction |
|
|