Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001D1LM |
Model Year Start: 2019 |
Model: GR Corolla |
Prod Date Range: [06/2018 - 01/2019] |
Title: CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL; 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during DCM (telematics transceiver) removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function When Necessary Procedures are not Performed
|
Link
|
Replacement of DCM (telematics transceiver)
|
DCM activation
|
Safety Connect System
|
|
Replacement of DCM (telematics transceiver)*
|
Code registration (Smart key System (for Start Function))
|
Smart Key System (for Start Function)
|
|
PROCEDURE
1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
2. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Click here
3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
Click here
4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Click here
5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY
Click here
6. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
Click here
7. DISCONNECT INSTRUMENT PANEL WIRE
(b) Remove the 2 nuts and disconnect the instrument panel wire as shown in the illustration.
|
|
8. REMOVE NAVIGATION ECU COVER (w/ Navigation System)
Click here
9. REMOVE NAVIGATION ECU WITH BRACKET (w/ Navigation System)
Click here
10. REMOVE DCM (TELEMATICS TRANSCEIVER)
(a) Disconnect the 5 connectors.
|
|
(b) Remove the 2 nuts and DCM (telematics transceiver).
|