| Last Modified: 01-27-2025 | 6.11:8.1.0 | Doc ID: RM100000001D1IN |
| Model Year Start: 2019 | Model: GR Corolla | Prod Date Range: [06/2018 - 01/2019] |
| Title: SEAT: REAR SEAT ASSEMBLY: INSTALLATION; 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019] | ||
INSTALLATION
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. INSTALL REAR SEAT CUSHION LOCK HOOK
(a) Engage the 2 claws to install a new rear seat cushion lock hook as shown in the illustration.
HINT:
Use the same procedure for the RH side and LH side.
|
Install in this Direction |
2. INSTALL REAR SEAT CUSHION ASSEMBLY
(a) Place the rear seat cushion assembly in the cabin.
NOTICE:
Be careful not to damage the vehicle body.
(b) Engage the rear seat cushion frame hook on the rear side of the rear seat cushion assembly as shown in the illustration.
|
*a |
Rear Seat Cushion Frame Hook (Front Side) |
|
*b |
Rear Seat Cushion Frame Hook (Rear Side) |
|
|
Install in this Direction (1) |
|
Install in this Direction (2) |
(c) Engage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly as shown in the illustration to install the rear seat cushion assembly.
NOTICE:
Confirm that the rear seat cushion assembly is securely installed.
3. INSTALL REAR SEATBACK ASSEMBLY RH
(a) Place the rear seatback assembly RH in the cabin.
NOTICE:
Be careful not to damage the vehicle body.
|
(b) Engage the 2 guides. |
|
(c) Temporarily install the rear seatback assembly RH with the 2 bolts.
(d) Fully tighten the bolt (A), and then the bolt (B) to install the rear seatback assembly RH.
Torque:
36.8 N·m {375 kgf·cm, 27 ft·lbf}
(e) Engage the 2 fasteners.
(f) Return the rear seatback assembly RH to its original position.
4. INSTALL REAR SEATBACK ASSEMBLY LH
(a) Place the rear seatback assembly LH in the cabin.
NOTICE:
Be careful not to damage the vehicle body.
|
(b) Engage the 2 guides. |
|
(c) Temporarily install the rear seatback assembly LH with the 2 bolts.
(d) Fully tighten the bolt (A), and then the bolt (B) to install the rear seatback assembly LH.
Torque:
36.8 N·m {375 kgf·cm, 27 ft·lbf}
(e) Engage the 2 fasteners.
(f) Return the rear seatback assembly LH to its original position.
5. CONNECT REAR SEAT CENTER LAP TYPE BELT ASSEMBLY
|
(a) Connect the rear seat center lap type belt assembly as shown in the illustration. |
|
6. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY
(a) Install the rear seat center headrest assembly.
7. INSTALL REAR SEAT HEADREST ASSEMBLY
(a) Install the 2 rear seat headrest assemblies.
|
|