Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001D1HV
Model Year Start: 2019 Model: GR Corolla Prod Date Range: [06/2018 -           ]
Title: SEAT BELT: REAR SEAT INNER BELT ASSEMBLY (for LH Side): INSPECTION; 2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 -        ]

INSPECTION

PROCEDURE

1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

(a) Inspect the rear seat inner with center belt assembly LH (for LH).

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

5 - 4

Rear LH seat belt unfastened

Below 1 Ω

Rear LH seat belt fastened

10 kΩ or higher

If the result is not as specified, replace the rear seat inner with center belt assembly LH.

*a

Component without harness connected

(Rear Seat Inner with Center Belt Assembly LH)

(b) Inspect the rear seat inner with center belt assembly LH (for Center).

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

Rear center seat belt unfastened

Below 1 Ω

Rear center seat belt fastened

10 kΩ or higher

If the result is not as specified, replace the rear seat inner with center belt assembly LH.

*a

Component without harness connected

(Rear Seat Inner with Center Belt Assembly LH)