Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001D0YC |
Model Year Start: 2019 |
Model: Corolla Hatchback |
Prod Date Range: [06/2018 -
] |
Title: K120 / K121 (CVT): K120 CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM: P275600,P27567E; Torque Converter Clutch Pressure Control Solenoid Control Circuit Performance/Stuck Off; 2019 - 2025 MY Corolla Corolla Hatchback [06/2018 - ] |
DTC
|
P275600
|
Torque Converter Clutch Pressure Control Solenoid Control Circuit Performance/Stuck Off
|
DTC
|
P27567E
|
Torque Converter Clutch Pressure Control Solenoid Control Actuator Stuck On
|
DESCRIPTION
Using the current from the TCM, the shift solenoid valve SLU controls the lock-up clutch pressure, and performs lock-up and flex lock-up control.
The TCM compares the engagement condition of the lock-up clutch with the lock-up schedule in the TCM memory to detect mechanical malfunctions of the shift solenoid valve SLU, transmission valve body assembly and torque converter assembly.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
MIL
|
Memory
|
Note
|
P275600
|
Torque Converter Clutch Pressure Control Solenoid Control Circuit Performance/Stuck Off
|
When the TCM commands lock-up ON, the difference between the engine speed (NE) and transmission revolution sensor (NT) signal is 250 rpm or more for 1 second or more (2-trip detection logic).
|
-
Transmission valve body assembly (Shift solenoid valve SLU)
-
Continuously variable transaxle assembly
-
Torque converter assembly
|
Comes on
|
DTC stored
|
SAE Code:
P2757
|
P27567E
|
Torque Converter Clutch Pressure Control Solenoid Control Actuator Stuck On
|
When the TCM commands lock-up OFF, the difference between the engine speed (NE) and transmission revolution sensor (NT) signal is less than 25 rpm for 1 second or more (1-trip detection logic).
|
-
Transmission valve body assembly (Shift solenoid valve SLU)
-
Continuously variable transaxle assembly
-
Torque converter assembly
|
Comes on
|
DTC stored
|
SAE Code:
P2757
|
MONITOR DESCRIPTION
When performing lock-up control (ON/OFF) of the torque converter assembly, the TCM compares the transmission revolution sensor (NT) signal and engine speed (NE) signal to detect mechanical malfunctions in the shift solenoid valves SLU.
If the torque converter does not lock-up while a lock-up ON command is being sent, the TCM detects it as a mechanical malfunction of the shift solenoid valve SLU.
If the difference between the engine speed (NE) signal and transmission revolution sensor (NT) signal is outside of the threshold, the TCM detects the malfunction, illuminates the MIL and stores a DTC.
MONITOR STRATEGY
Related DTCs
|
P2757: Torque converter clutch pressure control solenoid (Shift solenoid valve SLU)/Functional check
|
Required sensors/Components
|
Crankshaft position sensor
Transmission revolution sensor (NT)
CVT fluid temperature sensor
Engine coolant temperature sensor
Oil pressure sensor
Shift solenoid valve SL1
Shift solenoid valve SL2
Shift solenoid valve SLP
Shift solenoid valve SLS
Shift solenoid valve SLU
|
Frequency of operation
|
Continuous
|
Duration
|
OFF malfunction (A): 2 sec.
OFF malfunction (B): 2 sec.
ON malfunction: 1 sec.
|
MIL operation
|
OFF malfunction (A) and (B): 2 driving cycles
ON malfunction: 1 driving cycle
|
Sequence of operation
|
None
|
TYPICAL ENABLING CONDITIONS
All
ETC system
(Electronic throttle control system)
|
Not system down
(MIL illuminated by following codes: P0121, P0122, P0123, P0222, P0223, P0604, P0606, P0607, P060D, P060E, P0657, P0658, P1607, P16B0, P2102, P2103, P2111, P2112, P2119, P2135)
|
KCS sensor circuit
(Knock sensor)
|
Not circuit malfunction
(MIL illuminated by following codes: P0327, P0328)
|
ECT sensor circuit
(Engine coolant temperature sensor)
|
Not circuit malfunction
(MIL illuminated by following codes: P0117, P0118)
|
IAT sensor circuit
(Intake air temperature sensor)
|
Not circuit malfunction
(MIL illuminated by following codes: P0112, P0113)
|
Crankshaft position sensor "A" circuit
(Crankshaft position sensor)
|
Not circuit malfunction
(MIL illuminated by following codes: P0335, P0337, P0338)
|
CAN communication between ECM and TCM
|
Not system down
(MIL illuminated by following codes: U0100, U0101)
|
Low voltage flag
|
OFF
|
Pressure control solenoid "J" circuit
(Shift solenoid valve SLP)
|
Not circuit malfunction
(MIL illuminated by following codes: P2826, P2827)
|
Pressure control solenoid "K" circuit
(Shift solenoid valve SLS)
|
Not circuit malfunction
(MIL illuminated by following codes: P282F, P2830)
|
Torque converter clutch pressure control solenoid circuit
(Shift solenoid valve SLU)
|
Not circuit malfunction
(MIL illuminated by following codes: P2763, P2764)
|
Pressure control solenoid "A" circuit
(Shift solenoid valve SL1)
|
Not circuit malfunction
(MIL illuminated by following codes: P0962, P0963)
|
Pressure control solenoid "B" circuit
(Shift solenoid valve SL2)
|
Not circuit malfunction
(MIL illuminated by following codes: P0966, P0967)
|
Pressure control solenoid "M" circuit
(Shift solenoid valve SLG)
|
Not circuit malfunction
(MIL illuminated by following codes: P08CA, P08CB)
|
Transmission fluid temperature sensor "A" circuit
(CVT fluid temperature sensor)
|
Not circuit malfunction
(MIL illuminated by following codes: P0712, P0713)
|
Turbine speed sensor "A" circuit
(Transmission revolution sensor (NT))
|
Not circuit malfunction
(MIL illuminated by following codes: P0717, P07BF, P07C0)
|
Intermediate shaft speed sensor "C" circuit
(Transmission revolution sensor (NSS))
|
Not circuit malfunction
(MIL illuminated by following codes: P07C9, P07CA, P2751)
|
Gear shift position circuit
|
Not circuit malfunction
(MIL illuminated by following codes: P0916, P0917)
|
Output speed sensor circuit
(Transmission revolution sensor (NOUT))
|
Not circuit malfunction
(MIL illuminated by following codes: P0722, P077C, P077D)
|
Intermediate shaft speed sensor "B" circuit
(Transmission revolution sensor (NC1))
|
Not circuit malfunction
(MIL illuminated by following codes: P07C7, P07C8, P2747)
|
Engine switch
|
On (IG)
|
OFF malfunction (A)
Any of the following conditions are met: (a) or (b)
|
-
|
(a) Gear mode clutch
|
Engaged
|
(b) Belt mode clutch
|
Engaged
|
Engine speed
|
1000 rpm or more
|
Shift solenoid valve SLP
|
Operating shift control by TCM command
|
OFF malfunction (B)
Engine speed
|
550 rpm or more
|
Transmission fluid temperature
|
-10°C (14°F) or more
|
Time after following condition is met
|
0.5 sec. or more
|
- Variation of the accelerator pedal angle
(within 32.768 msec.)
|
Less than 0.5%
|
Shift solenoid valve SLS
|
Operating clamping pressure control by TCM command
|
ECT
|
60°C (140°F) or more
|
Spark advance from MAX. retard timing by KCS control
|
0 °CA or more
|
Gear and belt mode clutch
|
Either engagement or disengagement
|
ON malfunction
Any of the following conditions are met: (a) or (b)
|
-
|
(a) Gear mode clutch
|
Engaged
|
(b) Belt mode clutch
|
Engaged
|
Calculated input torque
at Turbine speed 2000 rpm
(Conditions vary with turbine speed)
|
74 N*m (755 kgf*cm, 55 ft.*lbf) or more
|
Engine speed
|
500 rpm or more
|
Accelerator pedal release flag
|
OFF
|
Shift solenoid valve SLP
|
Operating shift control by TCM command
|
TYPICAL MALFUNCTION THRESHOLDS
OFF malfunction
-
Both of the following conditions are met: OFF malfunction (A) and (B)
OFF malfunction (A)
Engine speed - Turbine speed
|
250 rpm or more
|
TCM indicate lock-up clutch
|
Engagement
|
OFF malfunction (B) (after OFF malfunction (A) is met)
Target clamping pressure
|
1.4 MPa (14.3 kgf/cm2, 203 psi) or more
|
Actual clamping pressure - Target clamping pressure
|
Less than 0.5 MPa (5.1 kgf/cm2, 73 psi)
|
-
ON malfunction
Engine speed - Turbine speed
|
Less than 25 rpm
|
TCM indicate lock-up clutch
|
Release
|
CONFIRMATION DRIVING PATTERN
CAUTION:
When performing the confirmation driving pattern, obey all speed limits and traffic laws.
-
Connect the Techstream to the DLC3.
-
Turn the engine switch on (IG) and turn the Techstream on.
-
Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
-
Turn the engine switch off and wait for 2 minutes or more.
-
Turn the engine switch on (IG) and turn the Techstream on.
-
Start the engine.
-
Drive the vehicle and confirm the lock-up on and off conditions according to Road Test. [*1]
Click here
HINT:
[*1]: Normal judgment procedure.
The normal judgment procedure is used to complete DTC judgment and also used when clearing permanent DTCs.
-
Stop the vehicle.
-
Enter the following menus: Powertrain / Transmission / Utility / All Readiness.
-
Input the DTC: P275600 or P27567E.
-
Check the DTC judgment result.
Techstream Display
|
Description
|
NORMAL
|
-
DTC judgment completed
-
System normal
|
ABNORMAL
|
-
DTC judgment completed
-
System abnormal
|
INCOMPLETE
|
-
DTC judgment not completed
-
Perform driving pattern after confirming DTC enabling conditions
|
N/A
|
-
Unable to perform DTC judgment
-
Number of DTCs which do not fulfill DTC preconditions has reached ECU memory limit
|
HINT:
-
If the judgment result shows NORMAL, the system is normal.
-
If the judgment result shows ABNORMAL, the system has a malfunction.
-
If the judgment result shows INCOMPLETE or N/A, perform the normal judgment procedure again.
CAUTION / NOTICE / HINT
HINT:
If any DTCs other than P275600 or P27567E are output, perform troubleshooting for those DTCs first.
PROCEDURE
1.
|
CHECK DTC OUTPUT (IN ADDITION TO DTC P275600 AND P27567E)
|
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / Transmission / Trouble Codes.
Powertrain > Transmission > Trouble Codes
(e) Read the DTCs using the Techstream.
HINT:
-
If DTC P275612 or P275614 is output, perform troubleshooting for that DTC first.
-
If DTCs P275612 and P275614 are not output but DTC P281F00 is output, perform troubleshooting for DTC P281F00 first.
Result
|
Proceed to
|
Only DTC P275600 and/or P27567E is output
|
A
|
DTC P275600 and/or P27567E and P275612 are output
|
B
|
DTC P275600 and/or P27567E and P275614 are output
|
C
|
DTC P275600 and P281F00 are output
|
D
|
DTC P275600 and/or P27567E and DTCs other than P275612, P275614 and P281F00 are output
|
E
|
A
|
|
|
2.
|
INSPECT TRANSMISSION VALVE BODY ASSEMBLY (SHIFT SOLENOID VALVE SLU)
|
(a) Disconnect the transmission wire connector from the shift solenoid valve SLU.
Click here
*1
|
Transmission Valve Body Assembly
|
*2
|
Shift Solenoid Valve SLU
|
*a
|
Component without harness connected
(Shift Solenoid Valve SLU)
|
-
|
-
|
(b) Connect a positive (+) lead from the battery with a 21 W bulb to terminal 1 and a negative (-) lead to terminal 2 of the shift solenoid valve SLU connector. Check that the valve moves and makes an operating sound.
OK:
Valve moves and makes an operating sound.
OK
|
|
|
3.
|
REPLACE CONTINUOUSLY VARIABLE TRANSAXLE ASSEMBLY
|
(a) Replace the continuously variable transaxle assembly.
Click here
NEXT
|
|
|
4.
|
REPLACE TORQUE CONVERTER ASSEMBLY
|
(a) Replace the torque converter assembly.
Click here
5.
|
REPLACE TRANSMISSION VALVE BODY ASSEMBLY
|
(a) Replace the transmission valve body assembly.
Click here
|