| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001D0VI |
| Model Year Start: 2019 | Model: Corolla Hatchback | Prod Date Range: [06/2018 - 09/2022] |
| Title: FRONT SUSPENSION: FRONT LOWER SUSPENSION ARM (for M20A-FKS RH Side): INSTALLATION; 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022] | ||
INSTALLATION
PROCEDURE
1. TEMPORARILY INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH
|
(a) Temporarily install the front lower No. 1 suspension arm sub-assembly RH to the front suspension crossmember sub-assembly with the 2 bolts and nut. |
|
(b) Connect the front lower No. 1 suspension arm sub-assembly RH to the front lower ball joint assembly RH with the bolt and 2 nuts.
Torque:
89 N·m {908 kgf·cm, 66 ft·lbf}
2. INSTALL FRONT WHEEL
Click here
![2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]; MAINTENANCE: TIRE AND WHEEL: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
3. STABILIZE SUSPENSION
Click here
4. FULLY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH
(a) Using SST, fully tighten the bolt (A).
SST: 09961-01270
|
*a |
Torque Wrench Fulcrum Length |
|
Turn |
Torque:
Specified tightening torque :
240 N·m {2447 kgf·cm, 177 ft·lbf}
HINT:
-
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click here
-
When using SST (fulcrum length of 200 mm (7.87 in.)) + torque wrench (fulcrum length of 600 mm (1.97 ft.)):
180 N*m (1835 kgf*cm, 133 ft.*lbf)
(b) Fully tighten the bolt (B).
Torque:
125 N·m {1275 kgf·cm, 92 ft·lbf}
NOTICE:
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.
5. INSTALL REAR ENGINE UNDER COVER RH
Click here
6. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY
Click here
7. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
Click here
8. PERFORM INITIALIZATION
|
Lighting System (w/ AFS) (EXT) |
|
|
|