Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001D0UX
Model Year Start: 2019 Model: Corolla Hatchback Prod Date Range: [06/2018 - 01/2019]
Title: AXLE AND DIFFERENTIAL: FRONT AXLE HUB (except G16E-GTS): ON-VEHICLE INSPECTION; 2019 MY Corolla Corolla Hatchback Corolla HV [06/2018 - 01/2019]

ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE FRONT WHEEL

Click here 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]; MAINTENANCE: TIRE AND WHEEL: REMOVAL+

2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY

Click here 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]; AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT: REPLACEMENT+

3. REMOVE FRONT DISC

Click here 2019 - 2022 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 09/2022]; BRAKE (FRONT): FRONT BRAKE (for Gasoline Model): REMOVAL+

4. INSPECT FRONT AXLE HUB BEARING LOOSENESS

(a) Using a dial indicator with magnetic base, check for looseness near the center of the front axle hub sub-assembly.

Maximum Looseness:

0.05 mm (0.00196 in.)

NOTICE:

  • Ensure that the dial indicator is set perpendicular to the measurement surface.
  • Keep the magnet of the dial indicator away from the front axle hub sub-assembly and front speed sensor.

HINT:

If the looseness exceeds the maximum, replace the front axle hub sub-assembly.

5. INSPECT FRONT AXLE HUB RUNOUT

(a) Using a dial indicator with magnetic base, check for runout on the surface of the front axle hub sub-assembly outside the front axle hub bolts.

Maximum Runout:

0.05 mm (0.00196 in.)

NOTICE:

  • Ensure that the dial indicator is set perpendicular to the measurement surface.
  • Make sure to set the tip of the dial indicator towards the outside of the front axle hub bolts.
  • Keep the magnet of the dial indicator away from the front axle hub sub-assembly and front speed sensor.

HINT:

If the runout exceeds the maximum, replace the front axle hub sub-assembly.

6. INSTALL FRONT DISC

Click here 2019 - 2022 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 09/2022]; BRAKE (FRONT): FRONT BRAKE (for Gasoline Model): INSTALLATION+

7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY

Click here 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]; AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT: REPLACEMENT+

8. INSTALL FRONT WHEEL

Click here 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]; MAINTENANCE: TIRE AND WHEEL: INSTALLATION+