Last Modified: 07-31-2024 6.11:8.1.0 Doc ID: RM100000001D0TL
Model Year Start: 2019 Model: GR Corolla Prod Date Range: [06/2018 - 01/2019]
Title: DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL; 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]

REMOVAL

PROCEDURE

1. REMOVE FRONT WHEEL LH

Click here 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]; MAINTENANCE: TIRE AND WHEEL: REMOVAL

2. REMOVE INLET NO. 1 AIR CLEANER (w/ Engine Hood Courtesy Switch)

Click here 2019 - 2020 MY Corolla Corolla Hatchback [06/2018 - 09/2019]; M20A-FKS (COOLING): COOLING FAN MOTOR (w/o Cooling Fan ECU): REMOVAL+

3. REMOVE FRONT FENDER LINER LH

Click here 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]; DOOR LOCK: WIRELESS DOOR LOCK BUZZER: REMOVAL+

4. REMOVE HEADLIGHT ASSEMBLY LH

Click here 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019]; LIGHTING (EXT): HEADLIGHT ASSEMBLY: REMOVAL

5. REMOVE HOOD LOCK ASSEMBLY

(a) w/ Engine Hood Courtesy Switch:

(1) Disconnect the connector.

(2) Disengage the clamp.

(b) Using a screwdriver with its tip wrapped with protective tape, remove the hood lock nut cap.

*a

Protective Tape

(c) Remove the 2 bolts and hood lock bolt.

*1

Hood Lock Bolt

(d) Disconnect the hood lock control cable assembly to remove the hood lock assembly.

6. REMOVE FRONT DOOR SCUFF PLATE LH

Click here 2019 - 2021 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 06/2020]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Hatchback): REMOVAL+

7. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

Click here 2019 - 2021 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 06/2020]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Hatchback): REMOVAL+

8. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Click here 2019 MY Corolla Corolla Hatchback Corolla HV [06/2018 - 01/2019]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (except G16E-GTS): REMOVAL+

9. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

(a) Disconnect the hood lock control cable assembly to remove the hood lock control lever sub-assembly.

10. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY

(a) Using a screwdriver, disengage each clamp and the grommet as shown in the illustration.

*1

Hood Lock Control Cable Assembly

-

-

*a

Clamp

*b

Grommet

HINT:

Tape the screwdriver tip before use.

(b) Pull the hood lock control cable assembly from the engine compartment to remove it.