Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001D0NG |
Model Year Start: 2019 |
Model: GR Corolla |
Prod Date Range: [06/2018 - 11/2022] |
Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM (for Gasoline Model (w/o Safe Exit Assist Function)): U1331; Software Incompatibility with Body Control Module "B"; 2019 - 2023 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 11/2022] |
DTC
|
U1331
|
Software Incompatibility with Body Control Module "B"
|
DESCRIPTION
This DTC is stored when the destination information of the main body ECU (multiplex network body ECU) does not match that of the blind spot monitor sensors.
Blind Spot Monitor Master
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
U1331
|
Software Incompatibility with Body Control Module "B"
|
Destination information of the main body ECU and blind spot monitor sensor do not match
|
-
Main body ECU (multiplex network body ECU)
-
Blind spot monitor sensor LH
|
Blind Spot Monitor Slave
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
U1331
|
Software Incompatibility with Body Control Module "B"
|
Destination information of the main body ECU and blind spot monitor sensor do not match
|
-
Main body ECU (multiplex network body ECU)
-
Blind spot monitor sensor RH
|
CAUTION / NOTICE / HINT
NOTICE:
-
When checking for DTCs, make sure that the blind spot monitor system is on.
-
Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.
PROCEDURE
1.
|
CONFIRM PART NUMBER (MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU))
|
(a) Check the main body ECU (multiplex network body ECU) part number.
(1) Check if the part number of the main body ECU (multiplex network body ECU) installed on the vehicle is correct.
OK:
The part number is correct.
OK
|
|
|
(a) Clear the DTCs.
Body Electrical > Blind Spot Monitor Master > Clear DTCs
Body Electrical > Blind Spot Monitor Slave > Clear DTCs
(b) Recheck for DTCs and check if the same DTC is output again.
Body Electrical > Blind Spot Monitor Master > Trouble Codes
Body Electrical > Blind Spot Monitor Slave > Trouble Codes
Result
|
Proceed to
|
No DTCs are output
|
A
|
DTC U1331 is output ("Blind Spot Monitor Master")
|
B
|
DTC U1331 is output ("Blind Spot Monitor Slave")
|
C
|
|