(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
2 (RB) - 6 (PL)
|
Shift lever in P
|
Below 1 Ω
|
Shift lever not in P
|
10 kΩ or higher
|
2 (RB) - 1 (RL)
|
Shift lever in R
|
Below 1 Ω
|
Shift lever not in R
|
10 kΩ or higher
|
2 (RB) - 9 (NL)
|
Shift lever in N
|
Below 1 Ω
|
Shift lever not in N
|
10 kΩ or higher
|
2 (RB) - 7 (DL)
|
Shift lever in D, M, "+" or "-"
|
Below 1 Ω
|
Shift lever not in D, M, "+" or "-"
|
10 kΩ or higher
|
If the result is not as specified, replace the park/neutral position switch assembly.
|
|
*a
|
Component without harness connected
(Park/Neutral Position Switch assembly)
|
|
|