| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001D0LP |
| Model Year Start: 2019 | Model: Corolla Hatchback | Prod Date Range: [06/2018 - 01/2019] |
| Title: K120 / K121 (CVT): SHIFT STROKE SENSOR: INSTALLATION; 2019 MY Corolla Corolla Hatchback [06/2018 - 01/2019] | ||
INSTALLATION
PROCEDURE
1. INSTALL SHIFT STROKE SENSOR
|
(a) Coat the O-ring of the shift stroke sensor with Toyota Genuine CVT fluid FE. NOTICE: If reusing the shift stroke sensor, check that the O-ring is not damaged. |
|
(b) Install the shift stroke sensor to the transaxle case sub-assembly with the bolt.
Torque:
5.4 N·m {55 kgf·cm, 48 in·lbf}
NOTICE:
Be careful not to damage the O-ring.
(c) Connect the shift stroke sensor connector.
2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY
Click here
![2019 MY Corolla Corolla Hatchback [06/2018 - 01/2019]; M20A-FKS (ENGINE CONTROL): ECM: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
3. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
Click here
4. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE
Click here
5. INSTALL INLET NO. 1 AIR CLEANER
Click here
6. INSTALL RADIATOR SUPPORT OPENING COVER
Click here
7. INSPECT FOR OIL LEAK
8. CHECK DATA LIST
Click here
|
|