| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001D0LI |
| Model Year Start: 2019 | Model: Corolla Hatchback | Prod Date Range: [06/2018 - ] |
| Title: K120 / K121 (CVT): REVOLUTION SENSOR (NSS SENSOR): INSPECTION; 2019 - 2025 MY Corolla Corolla Hatchback [06/2018 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT TRANSMISSION REVOLUTION SENSOR (NSS)
(a) Connect the battery to the transmission revolution sensor (NSS) as shown in the illustration.
|
*1 |
Battery |
*2 |
Ammeter |
|
*a |
Component without harness connected (Transmission Revolution Sensor (NSS)) |
*b |
Magnet |
|
*c |
5 mm (0.197 in.) or less |
- |
- |
(b) Wave a magnet left and right 5 mm (0.197 in.) or less from the tip of the transmission revolution sensor (NSS) to output a high/low signal while measuring the current.
NOTICE:
Make sure to wave the magnet during the inspection. The current will not change unless the magnet is moved as shown in the illustration.
(c) Measure the current according to the value(s) in the table below.
Standard Current:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
1 (NSSO) - 2 (NSSB) |
Low signal |
4 to 8 mA |
|
High signal |
12 to 16 mA |
If the result is not as specified, replace the transmission revolution sensor (NSS).
|
|