Last Modified: 07-31-2024 |
6.11:8.1.0 |
Doc ID: RM100000001D0LE |
Model Year Start: 2019 |
Model: Corolla Hatchback |
Prod Date Range: [06/2018 - 09/2022] |
Title: K120 / K121 (CVT): REVOLUTION SENSOR (NC1 SENSOR): REMOVAL; 2019 - 2022 MY Corolla Corolla Hatchback [06/2018 - 09/2022] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during transmission revolution sensor (NC1) removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure
|
Necessary Procedure
|
Effect/Inoperative when not Performed
|
Link
|
Replacement of CVT fluid
|
ATF thermal degradation estimate reset
|
The value of the Data List item "ATF Thermal Degradation Estimate" is not estimated correctly
|
|
Replacement of transmission valve body assembly
|
-
Reset transaxle compensation code
-
Perform reset memory
-
Deceleration sensor zero point calibration
-
CVT oil pressure calibration
-
Perform road test to allow TCM to learn
|
-
Large shift shock
-
Deterioration of fuel efficiency
|
for Initialization
for Registration
|
PROCEDURE
1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY
Click here
2. REMOVE TRANSMISSION REVOLUTION SENSOR (NC1)
(a) Disconnect the transmission revolution sensor (NC1) connector.
|
|
(b) Remove the bolt and transmission revolution sensor (NC1) from the transaxle case sub-assembly.
|
|
|