| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001D0IP |
| Model Year Start: 2019 | Model: Corolla Hatchback | Prod Date Range: [06/2018 - ] |
| Title: M20A-FKS (LUBRICATION): OIL LEVEL SENSOR: INSTALLATION; 2019 - 2025 MY Corolla Corolla Hatchback [06/2018 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
NOTICE:
This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
![2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
1. INSTALL ENGINE OIL LEVEL SENSOR
(a) Using an 8 mm socket wrench, install the engine oil level sensor to the stiffening crankcase assembly with the 2 bolts.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
(b) Install a new clip to the engine oil level sensor.
(c) Connect the engine oil level sensor connector.
2. INSTALL OIL PAN SUB-ASSEMBLY
Click here
3. ADD ENGINE OIL
Click here
4. INSPECT FOR ENGINE OIL LEAK
Click here
5. CHECK ENGINE OIL LEVEL
Click here
6. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY
Click here
|
|