| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001D0H6 |
| Model Year Start: 2019 | Model: Corolla Hatchback | Prod Date Range: [06/2018 - 09/2019] |
| Title: M20A-FKS (EMISSION CONTROL): EGR VALVE: INSTALLATION; 2019 - 2020 MY Corolla Corolla Hatchback [06/2018 - 09/2019] | ||
INSTALLATION
CAUTION / NOTICE / HINT
NOTICE:
This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
![2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
1. SET EGR VALVE ASSEMBLY
HINT:
Perform "Inspection After Repair" after replacing the EGR valve assembly.
Click here
(a) Set the EGR valve assembly to the camshaft housing.
HINT:
At this time, do not install the parts with bolts.
(b) Connect the No. 8 water by-pass hose to the EGR valve assembly and slide the clip to secure it.
(c) Install the No. 4 water by-pass hose to the EGR valve assembly and slide the clip to secure it.
2. INSTALL EGR COOLER ASSEMBLY
Click here
3. INSTALL EGR VALVE ASSEMBLY
|
(a) Using the 8 mm socket wrench, install the EGR valve assembly with the 2 bolts. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} |
|
4. INSTALL NO. 1 EGR PIPE SUB-ASSEMBLY
(a) Install a new EGR inlet gasket to the intake manifold.
(b) Install a new EGR valve adapter gasket to the No. 1 EGR pipe sub-assembly.
(c) Using an 8 mm socket wrench, install the No. 1 EGR pipe sub-assembly to the intake manifold and EGR valve assembly with the 4 bolts.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
(d) Connect the EGR valve assembly connector.
5. ADD ENGINE COOLANT
Click here
6. INSPECT FOR COOLANT LEAK
Click here
7. INSPECT FOR EXHAUST GAS LEAK
Click here
8. PERFORM INITIALIZATION
(a) Perform "Inspection After Repair" after replacing the EGR valve assembly.
Click here
|
|