Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001D0DK |
Model Year Start: 2019 |
Model: GR Corolla |
Prod Date Range: [06/2018 - 01/2019] |
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: REAR AIRBAG SENSOR: ON-VEHICLE INSPECTION; 2019 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 01/2019] |
ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
Be sure to correctly follow the removal and installation procedures for the side No. 2 airbag sensors.
PROCEDURE
1. INSPECT SIDE NO. 2 AIRBAG SENSOR (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check.
Click here
2. INSPECT SIDE NO. 2 AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag not Deployed)
(a) Perform a diagnostic system check.
Click here
(b) Visually check the side No. 2 airbag sensors for defects if a quarter panel of the vehicle or the area around a quarter panel is damaged.
HINT:
The defects are as follows:
-
Cracks in the sensor housing
-
Dents in the sensor housing
-
Chips in the sensor housing
-
Cracks or other damage to the connector
-
Damage to the serial number
OK:
No defects are found.
If any defects are found, replace the side No. 2 airbag sensor with a new one.
3. INSPECT SIDE NO. 2 AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag is Deployed)
(a) When airbags have deployed as the result of a collision, be sure to replace all side No. 2 airbag sensors in the damaged areas (anywhere in need of repair).
(b) Visually check the side No. 2 airbag sensors in undamaged areas for defects.
HINT:
The defects are as follows:
-
Cracks in the sensor housing
-
Dents in the sensor housing
-
Chips in the sensor housing
-
Cracks or other damage to the connector
-
Damage to the serial number
OK:
No defects are found.
If any defects are found or a side No. 2 airbag sensor has detected a major collision, replace the side No. 2 airbag sensor with a new one.
|